On Tuesday, December 01, 2015 at 05:48:39 PM, dingu...@opensource.altera.com wrote: > From: Dinh Nguyen <dingu...@opensource.altera.com> > > The scan manager is not needed for the Arria10. Edit the makefile to > build the scan manager for arria5 and cyclone5 only. > > Signed-off-by: Dinh Nguyen <dingu...@opensource.altera.com> > --- > arch/arm/mach-socfpga/Makefile | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-socfpga/Makefile > b/arch/arm/mach-socfpga/Makefile index 316b326..d4c5a42 100644 > --- a/arch/arm/mach-socfpga/Makefile > +++ b/arch/arm/mach-socfpga/Makefile > @@ -8,11 +8,14 @@ > # > > obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o \ > - fpga_manager.o scan_manager.o > + fpga_manager.o > + > obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o > > +ifneq ($(CONFIG_TARGET_SOCFPGA_ARRIA10),y) > # QTS-generated config file wrappers > -obj-y += wrap_pll_config.o > +obj-y += scan_manager.o wrap_pll_config.o > +endif > obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o \ > wrap_sdram_config.o > CFLAGS_wrap_iocsr_config.o += -I$(srctree)/board/$(BOARDDIR)
I'd suggest to use this construct here: obj-$(CONFIG_TARGET_SOCFPGA_CYCLONE5) += foo.o obj-$(CONFIG_TARGET_SOCFPGA_ARRIA5) += foo.o Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
