On Mon, 2015-11-30 at 09:24 +0100, Stefan Roese wrote: > Hi Sjoerd, > > On 30.11.2015 09:12, Sjoerd Simons wrote: > > On Fri, 2015-11-27 at 16:21 -0800, Simon Glass wrote: > > > +a few others who have submitted patches > > > > I suspect this is unrelated to the 3036 bringup, but at the moment > > i > > can't build the 3288 firefly SPL smaller then 32k :( (iotw small > > enoug > > to be used as an SD card image). The image ends up being about 250 > > bytes too big.. > > > > Playing silly games with nm, it seems the big items are the sdram > > bringup-code, mmc core/drivers and ofcourse (vs)printf related > > functions (followed by a long tail of smaller things). > > > > Seems like a bit of dieting is required ;) > > Did you try using the new tiny-printf implementation > (CONFIG_USE_TINY_PRINTF)? It should save you ~2.5KiB.
Thanks for the tip, a first quick tried unfortunately shows that both the gpio uclass and the mmc core support fail to build when that option is enabled (missing sprintf, and various _strtoXX functiosn). Probably worth a try in fixing that though given the pontential savings. -- Sjoerd Simons Collabora Ltd. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
