On Thu, Nov 19, 2015 at 07:24:45AM -0700, Simon Glass wrote: > +Tom > > Hi Lin, > > On 18 November 2015 at 22:49, hl <h...@rock-chips.com> wrote: > > Hi Simon, > > > > > > > > On 19/11/15 12:44, Simon Glass wrote: > >> > >> Hi Lin, > >> > >> > >> On 17 November 2015 at 18:19, hl <h...@rock-chips.com> wrote: > >>> > >>> Hi Simon, > >>> > >>> > >>> > >>> On 18/11/15 01:38, Simon Glass wrote: > >>>> > >>>> Hi Lin, > >>>> > >>>> On 16 November 2015 at 23:20, Lin Huang <h...@rock-chips.com> wrote: > >>>>> > >>>>> This series patch bring up rk3036 uboot, since rk3036 only 4K size > >>>>> SRAM for SPL, so in SPL stage only support timer, uart, sdram driver, > >>>>> and back to bootrom when finish ddr initial, and boot up second stage > >>>>> from bootrom.You can boot to command line(mmc info etc) for now use > >>>>> this patchset. > >>>>> > >>>>> Jeffy Chen (2): > >>>>> rockchip: Add max spl size & spl header configs > >>>>> rockchip: Add support for rk's second level loader > >>>>> > >>>>> Lin Huang (21): > >>>>> rockchip: add timer driver > >>>>> rockchip: move SYS_MALLOC_F_LEN to rk3288 own Kconfig > >>>>> rockchip: rename board-spl.c to rk3288-board-spl.c > >>>>> rockchip: add config decide whether to build common.c > >>>>> dm: core: Add SPL Kconfig for REGMAP and SYSCON > >>>>> rockchip: serial driver support rk3036 > >>>>> rockchip: Bring in RK3036 device tree file includes and bindings > >>>>> rockchip: rk3036: Add clock driver > >>>>> rockchip: rk3036: Add header files for GRF > >>>>> rockchip: rk3036: Add Soc reset driver > >>>>> rockchip: rk3036: Add a simple syscon driver > >>>>> rockchip: rk3036: Add pinctrl driver > >>>>> mmc: dw_mmc: move data transfer as a separate function > >>>>> mmc: dw_mmc: support fifo mode in dwc mmc driver > >>>>> rockchip: mmc: use non-removable property to disginguish emmc and > >>>>> sdcard register > >>>>> rockchip: mmc: get the fifo mode and fifo depth property from dts > >>>>> rockchip: add early uart driver > >>>>> rockchip: add rk3036 sdram driver > >>>>> rockchip: rk3036: Add core Soc start-up code > >>>>> rockchip: Add basic support for evb-rk3036 board > >>>>> rockchip: doc: show packet rk3036 uboot image > >>>>> > >>>>> arch/arm/dts/Makefile | 3 +- > >>>>> arch/arm/dts/rk3036-sdk.dts | 46 ++ > >>>>> arch/arm/dts/rk3036.dtsi | 428 ++++++++++++ > >>>>> arch/arm/include/asm/arch-rockchip/cru_rk3036.h | 168 +++++ > >>>>> arch/arm/include/asm/arch-rockchip/grf_rk3036.h | 493 > >>>>> ++++++++++++++ > >>>>> arch/arm/include/asm/arch-rockchip/sdram_rk3036.h | 341 ++++++++++ > >>>>> arch/arm/include/asm/arch-rockchip/timer.h | 22 + > >>>>> arch/arm/include/asm/arch-rockchip/uart.h | 44 ++ > >>>>> arch/arm/mach-rockchip/Kconfig | 28 +- > >>>>> arch/arm/mach-rockchip/Makefile | 10 +- > >>>>> arch/arm/mach-rockchip/board-spl.c | 294 --------- > >>>>> arch/arm/mach-rockchip/board.c | 1 + > >>>>> arch/arm/mach-rockchip/rk3036-board-spl.c | 55 ++ > >>>>> arch/arm/mach-rockchip/rk3036/Kconfig | 23 + > >>>>> arch/arm/mach-rockchip/rk3036/Makefile | 13 + > >>>>> arch/arm/mach-rockchip/rk3036/reset_rk3036.c | 45 ++ > >>>>> arch/arm/mach-rockchip/rk3036/save_boot_param.S | 32 + > >>>>> arch/arm/mach-rockchip/rk3036/sdram_rk3036.c | 764 > >>>>> ++++++++++++++++++++++ > >>>>> arch/arm/mach-rockchip/rk3036/syscon_rk3036.c | 21 + > >>>>> arch/arm/mach-rockchip/rk3288-board-spl.c | 277 ++++++++ > >>>>> arch/arm/mach-rockchip/rk3288/Kconfig | 9 + > >>>>> arch/arm/mach-rockchip/rk_early_print.c | 63 ++ > >>>>> arch/arm/mach-rockchip/rk_timer.c | 48 ++ > >>>>> board/evb_rk3036/evb_rk3036/Kconfig | 15 + > >>>>> board/evb_rk3036/evb_rk3036/MAINTAINERS | 0 > >>>>> board/evb_rk3036/evb_rk3036/Makefile | 7 + > >>>>> board/evb_rk3036/evb_rk3036/evb_rk3036.c | 49 ++ > >>>>> configs/chromebook_jerry_defconfig | 2 + > >>>>> configs/evb-rk3036_defconfig | 26 + > >>>>> configs/firefly-rk3288_defconfig | 2 + > >>>>> configs/sandbox_defconfig | 2 + > >>>>> doc/README.rockchip | 11 + > >>>>> drivers/clk/Makefile | 1 + > >>>>> drivers/clk/clk_rk3036.c | 414 ++++++++++++ > >>>>> drivers/core/Kconfig | 19 + > >>>>> drivers/core/Makefile | 4 +- > >>>>> drivers/mmc/dw_mmc.c | 140 ++-- > >>>>> drivers/mmc/rockchip_dw_mmc.c | 27 +- > >>>>> drivers/pinctrl/Kconfig | 9 + > >>>>> drivers/pinctrl/rockchip/Makefile | 1 + > >>>>> drivers/pinctrl/rockchip/pinctrl_rk3036.c | 276 ++++++++ > >>>>> drivers/serial/serial_rockchip.c | 1 + > >>>>> include/configs/evb_rk3036.h | 12 + > >>>>> include/configs/rk3036_common.h | 103 +++ > >>>>> include/configs/rk3288_common.h | 8 +- > >>>>> include/dt-bindings/clock/rk3036-cru.h | 186 ++++++ > >>>>> include/dwmmc.h | 5 + > >>>>> tools/Makefile | 6 + > >>>>> tools/rkcommon.c | 26 +- > >>>>> tools/rkcommon.h | 4 +- > >>>>> tools/rkimage.c | 2 +- > >>>>> tools/rksd.c | 6 +- > >>>>> tools/rkspi.c | 6 +- > >>>>> 53 files changed, 4222 insertions(+), 376 deletions(-) > >>>>> create mode 100644 arch/arm/dts/rk3036-sdk.dts > >>>>> create mode 100644 arch/arm/dts/rk3036.dtsi > >>>>> create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk3036.h > >>>>> create mode 100644 arch/arm/include/asm/arch-rockchip/grf_rk3036.h > >>>>> create mode 100644 arch/arm/include/asm/arch-rockchip/sdram_rk3036.h > >>>>> create mode 100644 arch/arm/include/asm/arch-rockchip/timer.h > >>>>> create mode 100644 arch/arm/include/asm/arch-rockchip/uart.h > >>>>> delete mode 100644 arch/arm/mach-rockchip/board-spl.c > >>>>> create mode 100644 arch/arm/mach-rockchip/rk3036-board-spl.c > >>>>> create mode 100644 arch/arm/mach-rockchip/rk3036/Kconfig > >>>>> create mode 100644 arch/arm/mach-rockchip/rk3036/Makefile > >>>>> create mode 100644 arch/arm/mach-rockchip/rk3036/reset_rk3036.c > >>>>> create mode 100644 arch/arm/mach-rockchip/rk3036/save_boot_param.S > >>>>> create mode 100644 arch/arm/mach-rockchip/rk3036/sdram_rk3036.c > >>>>> create mode 100644 arch/arm/mach-rockchip/rk3036/syscon_rk3036.c > >>>>> create mode 100644 arch/arm/mach-rockchip/rk3288-board-spl.c > >>>>> create mode 100644 arch/arm/mach-rockchip/rk_early_print.c > >>>>> create mode 100644 arch/arm/mach-rockchip/rk_timer.c > >>>>> create mode 100644 board/evb_rk3036/evb_rk3036/Kconfig > >>>>> create mode 100644 board/evb_rk3036/evb_rk3036/MAINTAINERS > >>>>> create mode 100644 board/evb_rk3036/evb_rk3036/Makefile > >>>>> create mode 100644 board/evb_rk3036/evb_rk3036/evb_rk3036.c > >>>>> create mode 100644 configs/evb-rk3036_defconfig > >>>>> create mode 100644 drivers/clk/clk_rk3036.c > >>>>> create mode 100644 drivers/pinctrl/rockchip/pinctrl_rk3036.c > >>>>> create mode 100644 include/configs/evb_rk3036.h > >>>>> create mode 100644 include/configs/rk3036_common.h > >>>>> create mode 100644 include/dt-bindings/clock/rk3036-cru.h > >>>>> > >>>>> -- > >>>>> 1.9.1 > >>>>> > >>>> Everything looks good except patch 15 which I think needs a few > >>>> tweaks. Can you please take a look? Either you could send a new > >>>> version of just that patch, or I can fix it up when applying it. > >>>> > >>>> It would be good to get this applied this week if possible. > >>> > >>> I will update patch 15 and upload new version today, thank you. > >> > >> A few more problems....I've had to update two of the patches. I'll > >> resend them to the list and have pushed everything to > >> u-boot-rockchip/testing. Please take a look and let me know if there > >> are any problems. Otherwise I'll push to master tomorrow or Friday. > > > > Thank you for your updating, i have download the latest code and > > test, it can work, there is not problem. Thanks again. > > > > OK, I have pulled this in and pushed it to master. > > Two problems remain though: > > 1. Most important - the mkimage tool is now only built for Rockchip (a > change I had to make to fix a build error) and there are two versions > of it. The two Kconfig options should move to become command-line > options for mkimage. These are CONFIG_ROCKCHIP_MAX_SPL_SIZE and > CONFIG_ROCKCHIP_SPL_HDR. Since mkimage is a tool that is released with > Linux distributions it needs to support all possible uses. We only > release a single version. My suggestion is to add a command line > option for mkimage to specify the Rockchip chip type rk3288, rk3066, > etc.) and for the code to use the correct size/hdr automatically. You > can then remove these Kconfig options.
This is going to be bad for distros that try and track our rc candidates even. I would suggest making use of 'mkimage -n' to pass rk3288/rk3066/rkfuturethings to the rockchip file and sort out those things there. -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot