On 16 November 2015 at 23:20, Lin Huang <h...@rock-chips.com> wrote: > add early uart driver so we can print debug message in > SPL stage > > Signed-off-by: Lin Huang <h...@rock-chips.com> > Acked-by: Simon Glass <s...@chromium.org> > --- > Changes in v1: None > Changes in v2: None > Changes in v3: > - pass uart base address to rk_uart_init() function > Changes in v4: None > Changes in v5: None > Changes in v6: > - Adviced by Simon: > - add some comment > > arch/arm/include/asm/arch-rockchip/uart.h | 44 +++++++++++++++++++++ > arch/arm/mach-rockchip/Makefile | 1 + > arch/arm/mach-rockchip/rk_early_print.c | 63 > +++++++++++++++++++++++++++++++ > 3 files changed, 108 insertions(+) > create mode 100644 arch/arm/include/asm/arch-rockchip/uart.h > create mode 100644 arch/arm/mach-rockchip/rk_early_print.c
Applied to u-boot-rockchip, thanks! (as discussed, there is future work to try to unify this with the ns16550 debug UART) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot