On 11/16/2015 08:53 PM, Simon Glass wrote:
Adjust all Tegra boards to use driver model for Ethernet, now that the
required drivers are converted.

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig

@@ -14,6 +14,7 @@ config TEGRA_ARMV7_COMMON
        select DM_GPIO
        select DM_PCI
        select DM_PCI_COMPAT
+       select DM_ETH

This should be set for Tegra210 too. I suggest creating a "config TEGRA_COMMON" to contain all the shared settings, and making TEGRA_ARMV7_COMMON and TEGRA_ARMV8_COMMON (also new) select that.

diff --git a/board/compulab/trimslice/trimslice.c 
b/board/compulab/trimslice/trimslice.c

-#ifdef CONFIG_PCI
-int board_eth_init(bd_t *bis)
-{
-       return pci_eth_init(bis);
-}
-#endif

Has the need to call this function already been removed by this point in the series. In other words, does each commit in this series compile and support using Ethernet? If not, anyone running "git bisect" is going to be very sad.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to