Hi Stefan, On Wed, Nov 18, 2015 at 3:54 AM, Stefan Roese <stefan.ro...@gmail.com> wrote:
> I'm not sure if this revert is the right way to solve this problem. > Please take a look at my answer a few weeks ago: > > https://www.mail-archive.com/u-boot@lists.denx.de/msg191206.html > > As mentioned in my mail above, the delay should be added after > the deassertion of the PHY reset signal. And not here in > phy_find_by_mask() for all boards. > > I just checked the code in mx6sxsabresd.c. Here also the delay is > missing: > > /* Reset AR8031 PHY */ > gpio_direction_output(IMX_GPIO_NR(2, 7) , 0); > udelay(500); > gpio_set_value(IMX_GPIO_NR(2, 7), 1); > > Could you please test with this change: > > /* Reset AR8031 PHY */ > gpio_direction_output(IMX_GPIO_NR(2, 7) , 0); > udelay(500); > gpio_set_value(IMX_GPIO_NR(2, 7), 1); > + udelay(1500); > > Or even better, check how long the reset needs to be inactive > before the PHY starts to work. Sure, I have even tried: --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -163,8 +163,9 @@ static int setup_fec(void) /* Reset AR8031 PHY */ gpio_direction_output(IMX_GPIO_NR(2, 7) , 0); - udelay(500); + udelay(50000); gpio_set_value(IMX_GPIO_NR(2, 7), 1); + udelay(50000); reg = readl(&anatop->pll_enet); reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE; and it does not work here: U-Boot 2016.01-rc1-00022-gfe52456-dirty (Nov 18 2015 - 09:28:02 -0200) CPU: Freescale i.MX6SX rev1.0 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 44C Reset cause: POR Board: MX6SX SABRE SDB I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 PCI: pcie phy link never came up In: serial Out: serial Err: serial Net: Board Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Booting from net ... No ethernet found. No ethernet found. Bad Linux ARM zImage magic! Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
