Hello Marek,
Am 10.11.2015 um 20:53 schrieb Marek Vasut:
This macro is no longer used, so just reap it.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Tom Rini <tr...@konsulko.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Heiko Schocher <h...@denx.de>
---
README | 5 -----
common/cmd_eeprom.c | 8 ++++----
2 files changed, 4 insertions(+), 9 deletions(-)
Reviewed-by: Heiko Schocher <h...@denx.de>
bye,
Heiko
diff --git a/README b/README
index ef8d437..8fb81e9 100644
--- a/README
+++ b/README
@@ -2705,11 +2705,6 @@ CBFS (Coreboot Filesystem) support
Enables the driver for SPI controller on SuperH. Currently
only SH7757 is supported.
- CONFIG_SPI_X
-
- Enables extended (16-bit) SPI EEPROM addressing.
- (symmetrical to CONFIG_I2C_X)
-
CONFIG_SOFT_SPI
Enables a software (bit-bang) SPI driver rather than
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index ea1d447..728606e 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -78,7 +78,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar
*buffer, unsigned cnt
unsigned maxlen;
#endif
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
uchar addr[2];
blk_off = offset & 0xFF; /* block offset */
@@ -95,7 +95,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar
*buffer, unsigned cnt
addr[1] = offset >> 8; /* upper address octet */
addr[2] = blk_off; /* lower address octet */
alen = 3;
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
addr[0] |= dev_addr; /* insert device address */
@@ -151,7 +151,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar
*buffer, unsigned cn
unsigned maxlen;
#endif
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
uchar addr[2];
blk_off = offset & 0xFF; /* block offset */
@@ -168,7 +168,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar
*buffer, unsigned cn
addr[1] = offset >> 8; /* upper address octet */
addr[2] = blk_off; /* lower address octet */
alen = 3;
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
addr[0] |= dev_addr; /* insert device address */
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
