Hello Valentin,

Am 13.11.2015 um 15:59 schrieb Valentin Longchamp:
From: Holger Brunck <holger.bru...@keymile.com>

We use the same settings for open firmware defines on all our powerpc
targets, so move them from the CPU specific headers to the common
powerpc header.

Signed-off-by: Holger Brunck <holger.bru...@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com>
---

  include/configs/km/km-powerpc.h    | 4 ++++
  include/configs/km/km83xx-common.h | 3 ---
  include/configs/km82xx.h           | 3 ---
  3 files changed, 4 insertions(+), 6 deletions(-)

Reviewed-by: Heiko Schocher <h...@denx.de>

bye,
Heiko

diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index 8121e5c..cf4a91c 100644
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -17,6 +17,10 @@
  #define CONFIG_CMD_DTT
  #define CONFIG_JFFS2_CMDLINE

+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
  /* standard km ethernet_present for piggy */
  #define CONFIG_KM_COMMON_ETH_INIT

diff --git a/include/configs/km/km83xx-common.h 
b/include/configs/km/km83xx-common.h
index 940000e..2325451 100644
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -153,9 +153,6 @@
  #define CONFIG_SYS_NS16550_COM1       (CONFIG_SYS_IMMR+0x4500)
  #define CONFIG_SYS_NS16550_COM2       (CONFIG_SYS_IMMR+0x4600)

-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
  #define CONFIG_OF_STDOUT_VIA_ALIAS

  /*
diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h
index 12f9d42..8c06dc1 100644
--- a/include/configs/km82xx.h
+++ b/include/configs/km82xx.h
@@ -431,10 +431,7 @@ int get_scl(void);

  #define       CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC     /* "bad" address */

-/* pass open firmware flat tree */
  #define CONFIG_FIT            1
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1

  #define OF_TBCLK              (bd->bi_busfreq / 4)
  #define OF_STDOUT_PATH                "/soc/cpm/serial@11a90"


--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to