flash operations are defined as static and reuse them with function-pointers so call them with generic function pounters instead of calling like normal functions.
Signed-off-by: Jagan Teki <jt...@openedev.com> --- drivers/mtd/spi/sf_ops.c | 2 -- drivers/mtd/spi/sf_probe.c | 15 +++------------ include/spi_flash.h | 13 ------------- 3 files changed, 3 insertions(+), 27 deletions(-) diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index 88a5f18..a22b9f9 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -942,7 +942,6 @@ int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash) flash->dual_flash = flash->spi->option; /* Assign spi_flash ops */ -#ifndef CONFIG_DM_SPI_FLASH flash->write = spi_flash_cmd_write_ops; #if defined(CONFIG_SPI_FLASH_SST) if (params->flags & SST_WR) @@ -957,7 +956,6 @@ int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash) #endif flash->erase = spi_flash_cmd_erase_ops; flash->read = spi_flash_cmd_read_ops; -#endif /* lock hooks are flash specific - assign them based on idcode0 */ switch (idcode[0]) { diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index e35b917..678b81c 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -120,7 +120,7 @@ static int spi_flash_std_read(struct udevice *dev, u32 offset, size_t len, { struct spi_flash *flash = dev_get_uclass_priv(dev); - return spi_flash_cmd_read_ops(flash, offset, len, buf); + return flash->read(flash, offset, len, buf); } int spi_flash_std_write(struct udevice *dev, u32 offset, size_t len, @@ -128,23 +128,14 @@ int spi_flash_std_write(struct udevice *dev, u32 offset, size_t len, { struct spi_flash *flash = dev_get_uclass_priv(dev); -#if defined(CONFIG_SPI_FLASH_SST) - if (flash->flags & SNOR_F_SST_WR) { - if (flash->spi->op_mode_tx & SPI_OPM_TX_BP) - return sst_write_bp(flash, offset, len, buf); - else - return sst_write_wp(flash, offset, len, buf); - } -#endif - - return spi_flash_cmd_write_ops(flash, offset, len, buf); + return flash->write(flash, offset, len, buf); } int spi_flash_std_erase(struct udevice *dev, u32 offset, size_t len) { struct spi_flash *flash = dev_get_uclass_priv(dev); - return spi_flash_cmd_erase_ops(flash, offset, len); + return flash->erase(flash, offset, len); } int spi_flash_std_probe(struct udevice *dev) diff --git a/include/spi_flash.h b/include/spi_flash.h index 0ae0062..dbd75a8 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -94,23 +94,10 @@ struct spi_flash { int (*flash_lock)(struct spi_flash *flash, u32 ofs, size_t len); int (*flash_unlock)(struct spi_flash *flash, u32 ofs, size_t len); int (*flash_is_locked)(struct spi_flash *flash, u32 ofs, size_t len); -#ifndef CONFIG_DM_SPI_FLASH - /* - * These are not strictly needed for driver model, but keep them here - * while the transition is in progress. - * - * Normally each driver would provide its own operations, but for - * SPI flash most chips use the same algorithms. One approach is - * to create a 'common' SPI flash device which knows how to talk - * to most devices, and then allow other drivers to be used instead - * if required, perhaps with a way of scanning through the list to - * find the driver that matches the device. - */ int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf); int (*write)(struct spi_flash *flash, u32 offset, size_t len, const void *buf); int (*erase)(struct spi_flash *flash, u32 offset, size_t len); -#endif }; struct dm_spi_flash_ops { -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot