Signed-off-by: Dirk Eibach <eib...@gdsys.de>
---
board/gdsys/compactcenter/compactcenter.c | 26 +++++++++-----------------
1 files changed, 9 insertions(+), 17 deletions(-)
diff --git a/board/gdsys/compactcenter/compactcenter.c
b/board/gdsys/compactcenter/compactcenter.c
index 477ef70..f448ef9 100644
--- a/board/gdsys/compactcenter/compactcenter.c
+++ b/board/gdsys/compactcenter/compactcenter.c
@@ -41,8 +41,6 @@ DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
- u32 pvr = get_pvr();
-
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
@@ -95,16 +93,14 @@ int board_early_init_f(void)
mtdcr(AHB_TOP, 0x8000004B);
mtdcr(AHB_BOT, 0x8000004B);
- if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) {
- /*
- * Configure USB-STP pins as alternate and not GPIO
- * It seems to be neccessary to configure the STP pins as GPIO
- * input at powerup (perhaps while USB reset is asserted). So
- * we configure those pins to their "real" function now.
- */
- gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
- gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
- }
+ /*
+ * Configure USB-STP pins as alternate and not GPIO
+ * It seems to be neccessary to configure the STP pins as GPIO
+ * input at powerup (perhaps while USB reset is asserted). So
+ * we configure those pins to their "real" function now.
+ */
+ gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+ gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
/* Trigger board component reset */
out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
@@ -250,7 +246,6 @@ int misc_init_r(void)
{
u32 sdr0_srst1 = 0;
u32 eth_cfg;
- u32 pvr = get_pvr();
/*
* Set EMAC mode/configuration (GMII, SGMII, RGMII...).
@@ -264,10 +259,7 @@ int misc_init_r(void)
/* Set the for 2 RGMII mode */
/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
- if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA))
- eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
- else
- eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+ eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
mtsdr(SDR0_ETH_CFG, eth_cfg);
/*
--
1.5.6.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
