On Mon, Oct 26, 2015 at 10:43:47AM +0100, Stefan Roese wrote: > On 23.10.2015 19:53, Kevin Smith wrote: > >A lot of extra configuration information was left over in the > >Marvell serdes and DDR3 initialization code for boards that > >U-boot does not support. Remove this extra config information, > >and the concept of fixing up board topologies with information > >loaded from an EEPROM. If this needs to be done, it should be > >handled in the board file, not in core code. > > > >Signed-off-by: Kevin Smith <kevin.sm...@elecsyscorp.com> > >Cc: Stefan Roese <s...@denx.de> > >Cc: Dirk Eibach <eib...@gdsys.de> > >Cc: Luka Perkov <luka.per...@sartura.hr> > > Thanks Kevin for working on this. For all 3 patches: > > Acked-by: Stefan Roese <s...@denx.de>
Thank you! Applied in marvell/master. Regards, Luka _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot