Hi I would like to do some more extensive tests with the U-boot and took a look at http://www.denx.de/wiki/DUTS/DUTSDocs
I think that the wiki is somehow out of date as examples as the following a) ./duts b should be rewritten to /duts -showconfig ? Is this true? b) ./duts -showconfig v38b gives on my system the following output: >Skipping testcase UBootDateHelp because of unfulfilled requirement 'rtc' >Skipping testcase UBootDate because of unfulfilled requirement 'rtc' >Skipping testcase UBootSleepRTC because of unfulfilled requirement 'rtc' >Skipping testcase UBootCmdDttHelp because of unfulfilled requirement 'dtt' >Skipping testcase UBootCmdDtt because of unfulfilled requirement 'dtt' >Skipping testcase UBootI2cHelp because of unfulfilled requirement 'i2c' >Skipping testcase UBootIdeHelp because of unfulfilled requirement 'ide' >Skipping testcase UBootDiskbootHelp because of unfulfilled requirement 'ide' >Skipping testcase UBootNandHelp because of unfulfilled requirement 'nand' >Skipping testcase UBootNandInfo because of unfulfilled requirement 'nand' >Skipping testcase UBootNandBad because of unfulfilled requirement 'nand' >Skipping testcase UBootNandErase because of unfulfilled requirement 'nand' >Skipping testcase UBootNandWrite because of unfulfilled requirement 'nand' >Skipping testcase UBootNandRead because of unfulfilled requirement 'nand' >Details for configuration view '_default' >Kernel context 'linux' > > prompt "# " > alt_prompt "~> " > image "/tftpboot/$BOARD/uImage-duts" > descr "config/VL_linux_context.tcl" > >Firmware context 'u-boot' > > prompt "=> " > image "/tftpboot/$BOARD/u-boot.bin-duts" > descr "config/VL_uboot_context.tcl" > >Host context 'host' > > prompt "]$ " > descr "config/VL_host_context.tcl" > shell "bash" c) "./duts lt" should be rewritten as "./duts -tc ? v38b" d) "./duts -d testsystems/ltp/ lt" shoud be rewritten to "./duts -td testsystems/ltp -tc ? v38b" I would volunteer to update the wiki if somebody can confirm that my observations are correct. Even looking for an hour or so at the sources. I am unable to find an answer which files I should modify to run tests for my sequoia board. My setup ist that $ /user/local/bin power 1 on powers up the 5V input of my sequoia board and under /dev/ttyUSB3 I see the U- Boot output after power on. I would like to start with a simple testcase and tried running >This gives me the following output > >Testcases directory: ./testsystems/dulg >Selected config: _default >List of selected test cases: >UBootBaseHelp > > > >##################################### ># running test case: UBootBaseHelp >##################################### > >ERROR: couldn't spawn 'connect'?! I would appreciate any hints. As the section "I"ntroducing suppport for a new VL " is just a little be too small for me. E.g. how can I add a new VL. Is there an example I just can copy and adjust it? Where do I specify the tty device for the sequoia? Best regards -- Niklaus Giger _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
