Dear Heiko Schocher,
In message <4a7003a4.2050...@denx.de> you wrote:
> Hello Wolfgang,
>
> Heiko Schocher wrote:
> > Wolfgang Denk wrote:
> >> In message <4a6ed511.6010...@denx.de> you wrote:
> >>> Hello Wolfgang,
> >>>
> >>> The following changes since commit
> >>> 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69:
> >>> Wolfgang Denk (1):
> >>> Prepare 2009.08-rc1 (again, after fixing last minute issues).
> >>>
> >>> are available in the git repository at:
> >>>
> >>> git://git.denx.de/u-boot-i2c.git master
> >>>
> >>> Alessandro Rubini (2):
> >>> arm nomadik: add gpio support
> >>> arm nomadik: add i2c
> >>>
> >>> Heiko Schocher (2):
> >>> arm, i2c: added support for the TWSI I2C Interface
> >>> Because twl4030 now has its own device files, move exiting
> >> Not pulled again because of this obscure commit.
> >
> > Hups ... Sorry ... I look for this issue ...
>
> Here comes the right version ... sorry for the confusion.
>
> The following changes since commit 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69:
> Wolfgang Denk (1):
> Prepare 2009.08-rc1 (again, after fixing last minute issues).
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> Alessandro Rubini (2):
> arm nomadik: add gpio support
> arm nomadik: add i2c
>
> Heiko Schocher (1):
> arm, i2c: added support for the TWSI I2C Interface
>
> Tom Rix (6):
> OMAP I2C Fix the sampling clock.
> TWL4030 Add initial support
> TWL4030 Add power reset button
> OMAP3 Move twl4030 power and led functions
> OMAP3 Move twl4030 mmc function
> OMAP3 Remove twl4030 defines
>
> Makefile | 1 +
> board/omap3/beagle/beagle.c | 4 +-
> board/omap3/common/power.c | 74 ----
> board/omap3/overo/overo.c | 4 +-
> board/omap3/pandora/pandora.c | 4 +-
> board/omap3/zoom1/zoom1.c | 12 +-
> board/omap3/zoom2/zoom2.c | 17 +-
> board/st/nhk8815/nhk8815.c | 16 +-
> cpu/arm926ejs/nomadik/Makefile | 2 +-
> cpu/arm926ejs/nomadik/gpio.c | 99 +++++
> drivers/i2c/Makefile | 1 +
> drivers/i2c/kirkwood_i2c.c | 484
> ++++++++++++++++++++++++
> drivers/i2c/omap24xx_i2c.c | 74 ++++-
> drivers/misc/Makefile | 1 +
> drivers/misc/twl4030_led.c | 52 +++
> drivers/mmc/omap3_mmc.c | 13 +-
> {board/omap3/common => drivers/power}/Makefile | 25 +-
> drivers/power/twl4030.c | 115 ++++++
> include/asm-arm/arch-nomadik/gpio.h | 42 ++
> include/asm-arm/arch-omap24xx/i2c.h | 44 +++
> include/asm-arm/arch-omap3/i2c.h | 70 +++-
> include/asm-arm/arch-omap3/omap3.h | 35 --
> include/configs/nhk8815.h | 18 +-
> include/configs/omap3_beagle.h | 6 +
> include/configs/omap3_evm.h | 5 +
> include/configs/omap3_overo.h | 6 +
> include/configs/omap3_pandora.h | 6 +
> include/configs/omap3_zoom1.h | 6 +
> include/configs/omap3_zoom2.h | 6 +
> include/twl4030.h | 401 ++++++++++++++++++++
> 30 files changed, 1484 insertions(+), 159 deletions(-)
> delete mode 100644 board/omap3/common/power.c
> create mode 100644 cpu/arm926ejs/nomadik/gpio.c
> create mode 100644 drivers/i2c/kirkwood_i2c.c
> create mode 100644 drivers/misc/twl4030_led.c
> rename {board/omap3/common => drivers/power}/Makefile (67%)
> create mode 100644 drivers/power/twl4030.c
> create mode 100644 include/asm-arm/arch-nomadik/gpio.h
> create mode 100644 include/twl4030.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
KLB is an acronym for `Known Lazy Bastard', aka non-FAQ reader, aka
person who would rather make someone take their time to explain
something basic than look it up in a FAQ.
-- Tom Christiansen in <6aq547$mn...@csnews.cs.colorado.edu>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
