Replace numerical bit shift with BIT macro in ti_qspi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31
Cc: Vignesh R <vigne...@ti.com> Reviewed-by: Tom Rini <tr...@konsulko.com> Signed-off-by: Jagan Teki <jt...@openedev.com> --- drivers/spi/ti_qspi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c index bd63db8..ecd9d78 100644 --- a/drivers/spi/ti_qspi.c +++ b/drivers/spi/ti_qspi.c @@ -20,13 +20,13 @@ #define QSPI_TIMEOUT 2000000 #define QSPI_FCLK 192000000 /* clock control */ -#define QSPI_CLK_EN (1 << 31) +#define QSPI_CLK_EN BIT(31) #define QSPI_CLK_DIV_MAX 0xffff /* command */ #define QSPI_EN_CS(n) (n << 28) #define QSPI_WLEN(n) ((n-1) << 19) -#define QSPI_3_PIN (1 << 18) -#define QSPI_RD_SNGL (1 << 16) +#define QSPI_3_PIN BIT(18) +#define QSPI_RD_SNGL BIT(16) #define QSPI_WR_SNGL (2 << 16) #define QSPI_INVAL (4 << 16) #define QSPI_RD_QUAD (7 << 16) @@ -36,8 +36,8 @@ #define QSPI_CSPOL(n) (1 << (1 + n*8)) #define QSPI_CKPOL(n) (1 << (n*8)) /* status */ -#define QSPI_WC (1 << 1) -#define QSPI_BUSY (1 << 0) +#define QSPI_WC BIT(1) +#define QSPI_BUSY BIT(0) #define QSPI_WC_BUSY (QSPI_WC | QSPI_BUSY) #define QSPI_XFER_DONE QSPI_WC #define MM_SWITCH 0x01 -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
