Thanks, I figured it out. I was decompressing the kernel over itself in RAM.
pat -----Original Message----- From: Scott Wood [mailto:scottw...@freescale.com] Sent: Tuesday, July 28, 2009 4:15 PM To: Patrick Heffernan Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] MPC8313 board hanging On Mon, Jul 27, 2009 at 03:46:07PM -0700, Patrick Heffernan wrote: > I'm working on a custom MPC8313 board. It was booting up fine using NOR > flash and ext2 filesystem. > > Configured u-boot and Linux and made transition to use NAND flash and > JFFS2 filesystem and now system hangs when running Linux kernel. It hangs in Linux, but you're posting to the U-Boot list? Do you think there's something U-Boot is doing that is causing this? > I've tried different things but I'm stuck. > > Thanks in advance for any help. > > pat > > > > Here is my boot-up sequence: > > > > NAND SPL - U-Boot 1.3.0 (Jul 27 2009 - 12:23:07) MPC83XX > > Loading from NAND : ........................ Please try using the latest upstream U-Boot and Linux, rather than what came with the BSP. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
