Dear John, in message <1248813749.3915.104.ca...@johns> you wrote: > > It's true, I was a little lax on commenting the I2C commands. If I were > to move forward with this documentation tool, I would comment these > commands more thoroughly like I did with the Memory commands.
Hm... of course I'm biased. Everybody thinks his own solution is the best of all. On the other hand, the DUTS/DULG setup has been under continuous development for more than 6 years (8 years if you nclude the old DocBook based approach). We have used it both for quality assurance and for documentation purposes with a number of customers. On our web server you can find board-specific versions for close to 40 different boards (OK, some of these are not maintained any more [because the respective board vendors don't care]), so you can be pretty sure that a lot of experience went into this to make this easy and efficient to handle and to make sure it scales well. Maybe you find the time to try to get DUTS running for one of your boards; for the beginning, a manually controlled setup would be sufficient - running in fully automatic mode like we do in our virtual lab not needed for such a first test. If you send us a tarball with the generated log files, we can put these on our web server, so you can test yourself with minimal effort what such a version of the documentation looks like. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Forty two. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
