> -----Original Message----- > From: Gong Qianyu [mailto:qianyu.g...@freescale.com] > Sent: Thursday, October 15, 2015 6:32 PM > To: u-boot@lists.denx.de > Cc: Hu Mingkai-B21284 <mingkai...@freescale.com>; Sun York-R58495 > <york...@freescale.com>; Hou Zhiqiang-B48286 <b48...@freescale.com>; > Xie Shaohui-B21989 <shaohui....@freescale.com>; Song Wenbin-B53747 > <wenbin.s...@freescale.com>; Wood Scott-B07421 > <scottw...@freescale.com>; Kushwaha Prabhakar-B32579 > <prabha...@freescale.com>; Wang Huan-B18965 > <alison.w...@freescale.com>; Gong Qianyu-B52263 > <qianyu.g...@freescale.com> > Subject: [Patch V5 02/17] common/board_f.c: modify the macro to use > get_clocks() more common > > get_clocks() should not be limited by ESDHC. > > Signed-off-by: Gong Qianyu <qianyu.g...@freescale.com> > --- > V5: > - No change. > V4: > - No change. > V3: > - Removed defines in PPC configs that have no need to use. > V2: > - No change. > > common/board_f.c | 2 +- > include/configs/colibri_vf.h | 1 + > include/configs/ls1021aqds.h | 1 + > include/configs/ls1021atwr.h | 1 + > include/configs/ls2085aqds.h | 1 + > include/configs/ls2085ardb.h | 1 + > include/configs/m53evk.h | 1 + > include/configs/mx25pdk.h | 1 + > include/configs/mx35pdk.h | 1 + > include/configs/mx51evk.h | 1 + > include/configs/mx53ard.h | 1 + > include/configs/mx53evk.h | 1 + > include/configs/mx53loco.h | 1 + > include/configs/mx53smd.h | 1 + > include/configs/mx6_common.h | 1 + > include/configs/mx7_common.h | 1 + > include/configs/usbarmory.h | 1 + > include/configs/vf610twr.h | 1 + > include/configs/woodburn_common.h | 1 + > 19 files changed, 19 insertions(+), 1 deletion(-) > > diff --git a/common/board_f.c b/common/board_f.c index 613332e..1bb84b3 > 100644 > --- a/common/board_f.c > +++ b/common/board_f.c > @@ -806,7 +806,7 @@ static init_fnc_t init_sequence_f[] = { #if > defined(CONFIG_BOARD_POSTCLK_INIT) > board_postclk_init, > #endif > -#ifdef CONFIG_FSL_ESDHC > +#ifdef CONFIG_FSL_CLK > get_clocks, > #endif
New define CONFIG_FSL_CLK used. Please add its description in README file. Also, is there no need of defining CONFIG_FSL_CLK for PowerPC platforms? --prabhakar _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
