Using macro's for flash power up read-only access code leads wrong behaviour hence use idcode0 for runtime detection, hence the flash which require this functionality gets detected at runtime.
Signed-off-by: Jagan Teki <jt...@openedev.com> --- Changes for v4, v3, v2: - none drivers/mtd/spi/sf_internal.h | 2 ++ drivers/mtd/spi/sf_ops.c | 7 +++---- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 8ef88f4..39749c2 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -64,7 +64,9 @@ enum spi_nor_option_flags { #define SPI_FLASH_CFI_MFR_SPANSION 0x01 #define SPI_FLASH_CFI_MFR_STMICRO 0x20 #define SPI_FLASH_CFI_MFR_MACRONIX 0xc2 +#define SPI_FLASH_CFI_MFR_SST 0xbf #define SPI_FLASH_CFI_MFR_WINBOND 0xef +#define SPI_FLASH_CFI_MFR_ATMEL 0x1f /* Erase commands */ #define CMD_ERASE_4K 0x20 diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index f63ce7a..f90f041 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -748,11 +748,10 @@ int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash) } /* Flash powers up read-only, so clear BP# bits */ -#if defined(CONFIG_SPI_FLASH_ATMEL) || \ - defined(CONFIG_SPI_FLASH_MACRONIX) || \ - defined(CONFIG_SPI_FLASH_SST) + if (idcode[0] == SPI_FLASH_CFI_MFR_ATMEL || + idcode[0] == SPI_FLASH_CFI_MFR_MACRONIX || + idcode[0] == SPI_FLASH_CFI_MFR_SST) write_sr(flash, 0); -#endif /* Assign spi data */ flash->spi = spi; -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot