On 10/09/2015 09:59 AM, Fabio Estevam wrote: > Hi Peng, > > On Thu, Oct 8, 2015 at 11:12 PM, Peng Fan <b51...@freescale.com> wrote: > >> Whether plugging nand chip into the socket or without nand chip, the board >> reboot >> well in my side. I did not do stress test, only do a few test, and each time >> 'reset', it can boot fine. > > Thanks for testing it. > > Maybe it is an issue with the board I have. I should receive a new one > next week and will test it. > > By the way, does your board work standalone (without the base board)? > Mine only works when it is connected to the base board and in this > case I need to supply 12V. > > Thanks > There is a jumper (J2) to change it to standalone. Mine works without baseboard and 5V supply.
-Nitin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
