From: Fabio Estevam <fabio.este...@freescale.com> Since commit 623d96e89aca6("imx: wdog: correct wcr register settings") issuing a 'reset' command causes the system to hang.
Unlike i.MX and Vybrid, the watchdog controller on LS102x is big-endian. This means that the watchdog on LS1021 has been working by accident as it does not use the big-endian accessors in drivers/watchdog/imx_watchdog.c. Commit 623d96e89aca6("imx: wdog: correct wcr register settings") only revelead the endianness problem on LS102x. In order to fix the reset hang, introduce a reset_cpu() implementation that is specific for ls102x, which accesses the watchdog WCR register in big-endian format. All that is required to reset LS102x is to clear the SRS bit. Reported-by: Sinan Akman <si...@writeme.com> Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> --- arch/arm/cpu/armv7/ls102xa/cpu.c | 21 +++++++++++++++++++++ drivers/watchdog/Makefile | 2 +- 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c index 8dd95d9..0de6f19 100644 --- a/arch/arm/cpu/armv7/ls102xa/cpu.c +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -13,6 +13,7 @@ #include <tsec.h> #include <netdev.h> #include <fsl_esdhc.h> +#include <config.h> #include "fsl_epu.h" @@ -354,3 +355,23 @@ void smp_kick_all_cpus(void) asm volatile("sev"); } #endif + +struct watchdog_regs { + u16 wcr; /* Control */ + u16 wsr; /* Service */ + u16 wrsr; /* Reset Status */ +}; + +#define WCR_SRS (1 << 4) +void reset_cpu(ulong addr) +{ + struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; + + clrbits_be16(&wdog->wcr, WCR_SRS); + + while (1) { + /* + * Let the watchdog trigger + */ + } +} diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 9e9cb55..a007ae8 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o -ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 mx7 vf610 ls102xa)) +ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 mx7 vf610)) obj-y += imx_watchdog.o endif obj-$(CONFIG_S5P) += s5p_wdt.o -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot