The DDR SDRAM initialization code has not been mainlined yet, but
U-Boot proper should work.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/uniphier-ph1-ld6b-ref.dts | 1 +
arch/arm/dts/uniphier-proxstream2-gentil.dts | 62 ++++++++++++++++++
arch/arm/dts/uniphier-proxstream2-vodka.dts | 62 ++++++++++++++++++
arch/arm/mach-uniphier/Kconfig | 18 ++++++
arch/arm/mach-uniphier/board_early_init_f.c | 14 ++++
arch/arm/mach-uniphier/boards.c | 22 +++++++
arch/arm/mach-uniphier/boot-mode/Makefile | 2 +
.../boot-mode/boot-mode-proxstream2.c | 75 ++++++++++++++++++++++
arch/arm/mach-uniphier/boot-mode/boot-mode.c | 6 ++
arch/arm/mach-uniphier/clk/Makefile | 2 +
arch/arm/mach-uniphier/clk/clk-proxstream2.c | 50 +++++++++++++++
arch/arm/mach-uniphier/cmd_pinmon.c | 7 ++
arch/arm/mach-uniphier/debug_ll.S | 49 ++++++++++++++
arch/arm/mach-uniphier/early-clk/Makefile | 2 +
.../early-clk/early-clk-proxstream2.c | 44 +++++++++++++
arch/arm/mach-uniphier/include/mach/boot-device.h | 2 +
arch/arm/mach-uniphier/include/mach/init.h | 12 ++++
arch/arm/mach-uniphier/include/mach/sc-regs.h | 2 +
arch/arm/mach-uniphier/include/mach/sg-regs.h | 2 +
arch/arm/mach-uniphier/init/Makefile | 2 +
arch/arm/mach-uniphier/init/init-proxstream2.c | 41 ++++++++++++
arch/arm/mach-uniphier/init/init.c | 7 ++
arch/arm/mach-uniphier/memconf/Makefile | 2 +
.../mach-uniphier/memconf/memconf-proxstream2.c | 64 ++++++++++++++++++
arch/arm/mach-uniphier/pinctrl/Makefile | 2 +
arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c | 45 +++++++++++++
.../mach-uniphier/pinctrl/pinctrl-proxstream2.c | 45 +++++++++++++
arch/arm/mach-uniphier/sbc/Makefile | 2 +
arch/arm/mach-uniphier/sbc/sbc-proxstream2.c | 48 ++++++++++++++
configs/ph1_ld6b_defconfig | 30 +++++++++
doc/README.uniphier | 8 +++
32 files changed, 733 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/uniphier-proxstream2-gentil.dts
create mode 100644 arch/arm/dts/uniphier-proxstream2-vodka.dts
create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
create mode 100644 arch/arm/mach-uniphier/clk/clk-proxstream2.c
create mode 100644 arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c
create mode 100644 arch/arm/mach-uniphier/init/init-proxstream2.c
create mode 100644 arch/arm/mach-uniphier/memconf/memconf-proxstream2.c
create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c
create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c
create mode 100644 arch/arm/mach-uniphier/sbc/sbc-proxstream2.c
create mode 100644 configs/ph1_ld6b_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0a7d184..5f10243 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -47,7 +47,9 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ph1-pro4-ref.dtb \
uniphier-ph1-pro5-4kbox.dtb \
uniphier-ph1-sld3-ref.dtb \
- uniphier-ph1-sld8-ref.dtb
+ uniphier-ph1-sld8-ref.dtb \
+ uniphier-proxstream2-gentil.dtb \
+ uniphier-proxstream2-vodka.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zed.dtb \
diff --git a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts
b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts
index ca68930..bd86f09 100644
--- a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts
@@ -3,6 +3,7 @@
*
* Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
*
+ * SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
diff --git a/arch/arm/dts/uniphier-proxstream2-gentil.dts
b/arch/arm/dts/uniphier-proxstream2-gentil.dts
new file mode 100644
index 0000000..81d2385
--- /dev/null
+++ b/arch/arm/dts/uniphier-proxstream2-gentil.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 Gentil Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+ model = "UniPhier ProXstream2 Gentil Board";
+ compatible = "socionext,proxstream2-gentil", "socionext,proxstream2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS2,115200";
+ stdout-path = &serial2;
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ i2c0 = &i2c0;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+/* for U-boot only */
+/ {
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&serial2 {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart2 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/uniphier-proxstream2-vodka.dts
b/arch/arm/dts/uniphier-proxstream2-vodka.dts
new file mode 100644
index 0000000..fba7b74
--- /dev/null
+++ b/arch/arm/dts/uniphier-proxstream2-vodka.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 Vodka Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+ model = "UniPhier ProXstream2 Vodka Board";
+ compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS2,115200";
+ stdout-path = &serial2;
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ i2c0 = &i2c0;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+/* for U-boot only */
+/ {
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&serial2 {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart2 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 7a62957..22ab798 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -42,6 +42,24 @@ config ARCH_UNIPHIER_PH1_PRO5
help
This enables support for UniPhier PH1-Pro5 SoC.
+config ARCH_UNIPHIER_PROXSTREAM2
+ bool "UniPhier ProXstream2 SoC"
+ select UNIPHIER_SMP
+ depends on !ARCH_UNIPHIER_PH1_SLD3 && \
+ !ARCH_UNIPHIER_PH1_LD4 && \
+ !ARCH_UNIPHIER_PH1_SLD8
+ help
+ This enables support for UniPhier ProXstream2 SoC.
+
+config ARCH_UNIPHIER_PH1_LD6B
+ bool "UniPhier PH1-LD6b SoC"
+ select UNIPHIER_SMP
+ depends on !ARCH_UNIPHIER_PH1_SLD3 && \
+ !ARCH_UNIPHIER_PH1_LD4 && \
+ !ARCH_UNIPHIER_PH1_SLD8
+ help
+ This enables support for UniPhier PH1-LD6b SoC.
+
config MICRO_SUPPORT_CARD
bool "Use Micro Support Card"
help
diff --git a/arch/arm/mach-uniphier/board_early_init_f.c
b/arch/arm/mach-uniphier/board_early_init_f.c
index fb49272..5e0d246 100644
--- a/arch/arm/mach-uniphier/board_early_init_f.c
+++ b/arch/arm/mach-uniphier/board_early_init_f.c
@@ -48,6 +48,20 @@ int board_early_init_f(void)
ph1_pro5_clk_init();
break;
#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
+ case SOC_UNIPHIER_PROXSTREAM2:
+ proxstream2_pin_init();
+ led_puts("U1");
+ proxstream2_clk_init();
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ case SOC_UNIPHIER_PH1_LD6B:
+ ph1_ld6b_pin_init();
+ led_puts("U1");
+ proxstream2_clk_init();
+ break;
+#endif
default:
break;
}
diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c
index fba8859..812c58f 100644
--- a/arch/arm/mach-uniphier/boards.c
+++ b/arch/arm/mach-uniphier/boards.c
@@ -71,6 +71,22 @@ static const struct uniphier_board_data ph1_pro5_data = {
};
#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+static const struct uniphier_board_data proxstream2_data = {
+ .dram_ch0_base = 0x80000000,
+ .dram_ch0_size = 0x40000000,
+ .dram_ch0_width = 32,
+ .dram_ch1_base = 0xc0000000,
+ .dram_ch1_size = 0x20000000,
+ .dram_ch1_width = 32,
+ .dram_ch2_base = 0xe0000000,
+ .dram_ch2_size = 0x20000000,
+ .dram_ch2_width = 16,
+ .dram_freq = 1866,
+};
+#endif
+
struct uniphier_board_id {
const char *compatible;
const struct uniphier_board_data *param;
@@ -92,6 +108,12 @@ static const struct uniphier_board_id uniphier_boards[] = {
#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
{ "socionext,ph1-pro5", &ph1_pro5_data, },
#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
+ { "socionext,proxstream2", &proxstream2_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ { "socionext,ph1-ld6b", &proxstream2_data, },
+#endif
};
const struct uniphier_board_data *uniphier_get_board_param(const void *fdt)
diff --git a/arch/arm/mach-uniphier/boot-mode/Makefile
b/arch/arm/mach-uniphier/boot-mode/Makefile
index 1d2f8b3..30c8874 100644
--- a/arch/arm/mach-uniphier/boot-mode/Makefile
+++ b/arch/arm/mach-uniphier/boot-mode/Makefile
@@ -5,3 +5,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += boot-mode-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += boot-mode-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += boot-mode-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += boot-mode-ph1-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += boot-mode-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += boot-mode-proxstream2.o
diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
new file mode 100644
index 0000000..10a47c6
--- /dev/null
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/io.h>
+#include <mach/boot-device.h>
+#include <mach/init.h>
+#include <mach/sbc-regs.h>
+#include <mach/sg-regs.h>
+
+static struct boot_device_info boot_device_table[] = {
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 4)"},
+ {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 4)"},
+ {BOOT_DEVICE_SPI, "SPI 3Byte CS0"},
+ {BOOT_DEVICE_SPI, "SPI 4Byte CS0"},
+ {BOOT_DEVICE_SPI, "SPI 3Byte CS1"},
+ {BOOT_DEVICE_SPI, "SPI 4Byte CS1"},
+ {BOOT_DEVICE_SPI, "SPI 4Byte CS0"},
+ {BOOT_DEVICE_SPI, "SPI 3Byte CS0"},
+ {BOOT_DEVICE_NONE, "Reserved"},
+};
+
+int get_boot_mode_sel(void)
+{
+ return (readl(SG_PINMON0) >> 1) & 0x1f;
+}
+
+u32 proxstream2_boot_device(void)
+{
+ int boot_mode;
+
+ boot_mode = get_boot_mode_sel();
+
+ return boot_device_table[boot_mode].type;
+}
+
+void proxstream2_boot_mode_show(void)
+{
+ int mode_sel, i;
+
+ mode_sel = get_boot_mode_sel();
+
+ puts("Boot Mode Pin:\n");
+
+ for (i = 0; i < ARRAY_SIZE(boot_device_table); i++)
+ printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i,
+ boot_device_table[i].info);
+}
diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c
b/arch/arm/mach-uniphier/boot-mode/boot-mode.c
index 60329eb..c6cafa7 100644
--- a/arch/arm/mach-uniphier/boot-mode/boot-mode.c
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c
@@ -33,6 +33,12 @@ u32 spl_boot_device(void)
case SOC_UNIPHIER_PH1_PRO5:
return ph1_pro5_boot_device();
#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ case SOC_UNIPHIER_PROXSTREAM2:
+ case SOC_UNIPHIER_PH1_LD6B:
+ return proxstream2_boot_device();
+#endif
default:
return BOOT_DEVICE_NONE;
}
diff --git a/arch/arm/mach-uniphier/clk/Makefile
b/arch/arm/mach-uniphier/clk/Makefile
index 873c4f7..4f397b9 100644
--- a/arch/arm/mach-uniphier/clk/Makefile
+++ b/arch/arm/mach-uniphier/clk/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += clk-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += clk-ph1-pro4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += clk-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += clk-ph1-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += clk-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += clk-proxstream2.o
diff --git a/arch/arm/mach-uniphier/clk/clk-proxstream2.c
b/arch/arm/mach-uniphier/clk/clk-proxstream2.c
new file mode 100644
index 0000000..b494021
--- /dev/null
+++ b/arch/arm/mach-uniphier/clk/clk-proxstream2.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sc-regs.h>
+
+void proxstream2_clk_init(void)
+{
+ u32 tmp;
+
+ /* deassert reset */
+ tmp = readl(SC_RSTCTRL);
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO;
+#endif
+#ifdef CONFIG_UNIPHIER_ETH
+ tmp |= SC_RSTCTRL_NRST_ETHER;
+#endif
+#ifdef CONFIG_NAND_DENALI
+ tmp |= SC_RSTCTRL_NRST_NAND;
+#endif
+ writel(tmp, SC_RSTCTRL);
+ readl(SC_RSTCTRL); /* dummy read */
+
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ tmp = readl(SC_RSTCTRL2);
+ tmp |= SC_RSTCTRL2_NRST_USB3B1;
+ writel(tmp, SC_RSTCTRL2);
+ readl(SC_RSTCTRL2); /* dummy read */
+#endif
+
+ /* privide clocks */
+ tmp = readl(SC_CLKCTRL);
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
+ SC_CLKCTRL_CEN_GIO;
+#endif
+#ifdef CONFIG_UNIPHIER_ETH
+ tmp |= SC_CLKCTRL_CEN_ETHER;
+#endif
+#ifdef CONFIG_NAND_DENALI
+ tmp |= SC_CLKCTRL_CEN_NAND;
+#endif
+ writel(tmp, SC_CLKCTRL);
+ readl(SC_CLKCTRL); /* dummy read */
+}
diff --git a/arch/arm/mach-uniphier/cmd_pinmon.c
b/arch/arm/mach-uniphier/cmd_pinmon.c
index 58c53bf..b15ee9d 100644
--- a/arch/arm/mach-uniphier/cmd_pinmon.c
+++ b/arch/arm/mach-uniphier/cmd_pinmon.c
@@ -33,6 +33,13 @@ static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
ph1_pro5_boot_mode_show();
break;
#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ case SOC_UNIPHIER_PROXSTREAM2:
+ case SOC_UNIPHIER_PH1_LD6B:
+ proxstream2_boot_mode_show();
+ break;
+#endif
default:
break;
}
diff --git a/arch/arm/mach-uniphier/debug_ll.S
b/arch/arm/mach-uniphier/debug_ll.S
index 056f77e..d8c9fe4 100644
--- a/arch/arm/mach-uniphier/debug_ll.S
+++ b/arch/arm/mach-uniphier/debug_ll.S
@@ -125,6 +125,55 @@ ph1_sld8_end:
b init_uart
ph1_pro5_end:
#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
+#define PROXSTREAM2_UART_CLK 88900000
+ cmp r1, #0x2E
+ bne proxstream2_end
+
+ ldr r0, =SG_IECTRL
+ ldr r1, [r0]
+ orr r1, r1, #1
+ str r1, [r0]
+
+ sg_set_pinsel 217, 8, 8, 4, r0, r1 @ TXD0 -> TXD0
+ sg_set_pinsel 115, 8, 8, 4, r0, r1 @ TXD1 -> TXD1
+ sg_set_pinsel 113, 8, 8, 4, r0, r1 @ TXD2 -> TXD2
+ sg_set_pinsel 219, 8, 8, 4, r0, r1 @ TXD3 -> TXD3
+
+ ldr r0, =SC_CLKCTRL
+ ldr r1, [r0]
+ orr r1, r1, #SC_CLKCTRL_CEN_PERI
+ str r1, [r0]
+
+ ldr r3, =DIV_ROUND(PROXSTREAM2_UART_CLK, 16 * BAUDRATE)
+
+ b init_uart
+proxstream2_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+#define PH1_LD6B_UART_CLK 88900000
+ cmp r1, #0x2F
+ bne ph1_ld6b_end
+
+ ldr r0, =SG_IECTRL
+ ldr r1, [r0]
+ orr r1, r1, #1
+ str r1, [r0]
+
+ sg_set_pinsel 135, 3, 8, 4, r0, r1 @ PORT10 -> TXD0
+ sg_set_pinsel 115, 0, 8, 4, r0, r1 @ TXD1 -> TXD1
+ sg_set_pinsel 113, 2, 8, 4, r0, r1 @ SBO0 -> TXD2
+
+ ldr r0, =SC_CLKCTRL
+ ldr r1, [r0]
+ orr r1, r1, #SC_CLKCTRL_CEN_PERI
+ str r1, [r0]
+
+ ldr r3, =DIV_ROUND(PH1_LD6B_UART_CLK, 16 * BAUDRATE)
+
+ b init_uart
+ph1_ld6b_end:
+#endif
init_uart:
addruart r0, r1, r2
diff --git a/arch/arm/mach-uniphier/early-clk/Makefile
b/arch/arm/mach-uniphier/early-clk/Makefile
index 939795c..393ea96 100644
--- a/arch/arm/mach-uniphier/early-clk/Makefile
+++ b/arch/arm/mach-uniphier/early-clk/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += early-clk-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += early-clk-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += early-clk-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += early-clk-ph1-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += early-clk-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += early-clk-proxstream2.o
diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c
b/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c
new file mode 100644
index 0000000..c303f16
--- /dev/null
+++ b/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sc-regs.h>
+
+int proxstream2_early_clk_init(const struct uniphier_board_data *bd)
+{
+ u32 tmp;
+
+ /* deassert reset */
+ if (spl_boot_device() != BOOT_DEVICE_NAND) {
+ tmp = readl(SC_RSTCTRL);
+ tmp &= ~SC_RSTCTRL_NRST_NAND;
+ writel(tmp, SC_RSTCTRL);
+ };
+
+ tmp = readl(SC_RSTCTRL4);
+ tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 |
+ SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 |
+ SC_RSTCTRL4_NRST_UMC32 | SC_RSTCTRL4_NRST_UMC31 |
+ SC_RSTCTRL4_NRST_UMC30;
+ writel(tmp, SC_RSTCTRL4);
+ readl(SC_RSTCTRL4); /* dummy read */
+
+ /* privide clocks */
+ tmp = readl(SC_CLKCTRL);
+ tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
+ writel(tmp, SC_CLKCTRL);
+
+ tmp = readl(SC_CLKCTRL4);
+ tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC2 |
+ SC_CLKCTRL4_CEN_UMC1 | SC_CLKCTRL4_CEN_UMC0;
+ writel(tmp, SC_CLKCTRL4);
+ readl(SC_CLKCTRL4); /* dummy read */
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/include/mach/boot-device.h
b/arch/arm/mach-uniphier/include/mach/boot-device.h
index 3cbe773..2ab5a53 100644
--- a/arch/arm/mach-uniphier/include/mach/boot-device.h
+++ b/arch/arm/mach-uniphier/include/mach/boot-device.h
@@ -15,9 +15,11 @@ struct boot_device_info {
u32 ph1_sld3_boot_device(void);
u32 ph1_ld4_boot_device(void);
u32 ph1_pro5_boot_device(void);
+u32 proxstream2_boot_device(void);
void ph1_sld3_boot_mode_show(void);
void ph1_ld4_boot_mode_show(void);
void ph1_pro5_boot_mode_show(void);
+void proxstream2_boot_mode_show(void);
#endif /* _ASM_BOOT_DEVICE_H_ */
diff --git a/arch/arm/mach-uniphier/include/mach/init.h
b/arch/arm/mach-uniphier/include/mach/init.h
index 914182d..5108edd 100644
--- a/arch/arm/mach-uniphier/include/mach/init.h
+++ b/arch/arm/mach-uniphier/include/mach/init.h
@@ -27,11 +27,13 @@ int ph1_ld4_init(const struct uniphier_board_data *bd);
int ph1_pro4_init(const struct uniphier_board_data *bd);
int ph1_sld8_init(const struct uniphier_board_data *bd);
int ph1_pro5_init(const struct uniphier_board_data *bd);
+int proxstream2_init(const struct uniphier_board_data *bd);
#if defined(CONFIG_MICRO_SUPPORT_CARD)
int ph1_sld3_sbc_init(const struct uniphier_board_data *bd);
int ph1_ld4_sbc_init(const struct uniphier_board_data *bd);
int ph1_pro4_sbc_init(const struct uniphier_board_data *bd);
+int proxstream2_sbc_init(const struct uniphier_board_data *bd);
#else
static inline int ph1_sld3_sbc_init(const struct uniphier_board_data *bd)
{
@@ -47,6 +49,11 @@ static inline int ph1_pro4_sbc_init(const struct
uniphier_board_data *bd)
{
return 0;
}
+
+static inline int proxstream2_sbc_init(const struct uniphier_board_data *bd)
+{
+ return 0;
+}
#endif
int ph1_sld3_bcu_init(const struct uniphier_board_data *bd);
@@ -54,6 +61,7 @@ int ph1_ld4_bcu_init(const struct uniphier_board_data *bd);
int memconf_init(const struct uniphier_board_data *bd);
int ph1_sld3_memconf_init(const struct uniphier_board_data *bd);
+int proxstream2_memconf_init(const struct uniphier_board_data *bd);
int ph1_sld3_pll_init(const struct uniphier_board_data *bd);
int ph1_ld4_pll_init(const struct uniphier_board_data *bd);
@@ -65,6 +73,7 @@ int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data
*bd);
int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd);
int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd);
+int proxstream2_early_clk_init(const struct uniphier_board_data *bd);
int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd);
@@ -77,10 +86,13 @@ void ph1_ld4_pin_init(void);
void ph1_pro4_pin_init(void);
void ph1_sld8_pin_init(void);
void ph1_pro5_pin_init(void);
+void proxstream2_pin_init(void);
+void ph1_ld6b_pin_init(void);
void ph1_ld4_clk_init(void);
void ph1_pro4_clk_init(void);
void ph1_pro5_clk_init(void);
+void proxstream2_clk_init(void);
#define pr_err(fmt, args...) printf(fmt, ##args)
diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h
b/arch/arm/mach-uniphier/include/mach/sc-regs.h
index 903e405..474b82d 100644
--- a/arch/arm/mach-uniphier/include/mach/sc-regs.h
+++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h
@@ -64,6 +64,7 @@
#define SC_RSTCTRL4_NRST_UMCA2 (0x1 << 10) /* UMC ch2 standby */
#define SC_RSTCTRL4_NRST_UMCA1 (0x1 << 9) /* UMC ch1 standby */
#define SC_RSTCTRL4_NRST_UMCA0 (0x1 << 8) /* UMC ch0 standby */
+#define SC_RSTCTRL4_NRST_UMC32 (0x1 << 6) /* UMC ch2 */
#define SC_RSTCTRL4_NRST_UMC31 (0x1 << 5) /* UMC ch1 */
#define SC_RSTCTRL4_NRST_UMC30 (0x1 << 4) /* UMC ch0 */
@@ -83,6 +84,7 @@
/* Pro5 or newer */
#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c)
#define SC_CLKCTRL4_CEN_UMCSB (0x1 << 12) /* UMC system bus */
+#define SC_CLKCTRL4_CEN_UMC2 (0x1 << 2) /* UMC ch2 */
#define SC_CLKCTRL4_CEN_UMC1 (0x1 << 1) /* UMC ch1 */
#define SC_CLKCTRL4_CEN_UMC0 (0x1 << 0) /* UMC ch0 */
diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h
b/arch/arm/mach-uniphier/include/mach/sg-regs.h
index 168b35e..678d437 100644
--- a/arch/arm/mach-uniphier/include/mach/sg-regs.h
+++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h
@@ -53,6 +53,8 @@
#define SG_MEMCONF_CH2_NUM_MASK (0x1 << 24)
#define SG_MEMCONF_CH2_NUM_1 (0x1 << 24)
#define SG_MEMCONF_CH2_NUM_2 (0x0 << 24)
+/* PH1-LD6b, ProXstream2 only */
+#define SG_MEMCONF_CH2_DISABLE (0x1 << 21)
#define SG_MEMCONF_SPARSEMEM (0x1 << 4)
diff --git a/arch/arm/mach-uniphier/init/Makefile
b/arch/arm/mach-uniphier/init/Makefile
index 1524a8d..98833b5 100644
--- a/arch/arm/mach-uniphier/init/Makefile
+++ b/arch/arm/mach-uniphier/init/Makefile
@@ -5,3 +5,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += init-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += init-ph1-pro4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += init-ph1-sld8.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += init-ph1-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += init-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += init-proxstream2.o
diff --git a/arch/arm/mach-uniphier/init/init-proxstream2.c
b/arch/arm/mach-uniphier/init/init-proxstream2.c
new file mode 100644
index 0000000..8d03b8f
--- /dev/null
+++ b/arch/arm/mach-uniphier/init/init-proxstream2.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/compiler.h>
+#include <mach/init.h>
+#include <mach/micro-support-card.h>
+
+int proxstream2_init(const struct uniphier_board_data *bd)
+{
+ proxstream2_sbc_init(bd);
+
+ support_card_reset();
+
+ support_card_init();
+
+ led_puts("L0");
+
+ memconf_init(bd);
+ proxstream2_memconf_init(bd);
+
+ led_puts("L1");
+
+ proxstream2_early_clk_init(bd);
+
+ led_puts("L2");
+
+ led_puts("L3");
+
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+ preloader_console_init();
+#endif
+
+ led_puts("L4");
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/init/init.c
b/arch/arm/mach-uniphier/init/init.c
index 2649e6c..bbfc8e5 100644
--- a/arch/arm/mach-uniphier/init/init.c
+++ b/arch/arm/mach-uniphier/init/init.c
@@ -45,6 +45,13 @@ void spl_board_init(void)
ph1_pro5_init(param);
break;
#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ case SOC_UNIPHIER_PROXSTREAM2:
+ case SOC_UNIPHIER_PH1_LD6B:
+ proxstream2_init(param);
+ break;
+#endif
default:
break;
}
diff --git a/arch/arm/mach-uniphier/memconf/Makefile
b/arch/arm/mach-uniphier/memconf/Makefile
index 1a718f3..42057a2 100644
--- a/arch/arm/mach-uniphier/memconf/Makefile
+++ b/arch/arm/mach-uniphier/memconf/Makefile
@@ -1,2 +1,4 @@
obj-y += memconf.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += memconf-ph1-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += memconf-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += memconf-proxstream2.o
diff --git a/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c
b/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c
new file mode 100644
index 0000000..d7bf0d4
--- /dev/null
+++ b/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+int proxstream2_memconf_init(const struct uniphier_board_data *bd)
+{
+ u32 tmp;
+ unsigned long size_per_word;
+
+ tmp = readl(SG_MEMCONF);
+
+ tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK);
+
+ switch (bd->dram_ch2_width) {
+ case 16:
+ tmp |= SG_MEMCONF_CH2_NUM_1;
+ size_per_word = bd->dram_ch2_size;
+ break;
+ case 32:
+ tmp |= SG_MEMCONF_CH2_NUM_2;
+ size_per_word = bd->dram_ch2_size >> 1;
+ break;
+ default:
+ pr_err("error: unsupported DRAM Ch2 width\n");
+ return -EINVAL;
+ }
+
+ /* Set DDR size */
+ switch (size_per_word) {
+ case SZ_64M:
+ tmp |= SG_MEMCONF_CH2_SZ_64M;
+ break;
+ case SZ_128M:
+ tmp |= SG_MEMCONF_CH2_SZ_128M;
+ break;
+ case SZ_256M:
+ tmp |= SG_MEMCONF_CH2_SZ_256M;
+ break;
+ case SZ_512M:
+ tmp |= SG_MEMCONF_CH2_SZ_512M;
+ break;
+ default:
+ pr_err("error: unsupported DRAM Ch2 size\n");
+ return -EINVAL;
+ }
+
+ if (size_per_word)
+ tmp &= ~SG_MEMCONF_CH2_DISABLE;
+ else
+ tmp |= SG_MEMCONF_CH2_DISABLE;
+
+ writel(tmp, SG_MEMCONF);
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/pinctrl/Makefile
b/arch/arm/mach-uniphier/pinctrl/Makefile
index a785245..8517595 100644
--- a/arch/arm/mach-uniphier/pinctrl/Makefile
+++ b/arch/arm/mach-uniphier/pinctrl/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += pinctrl-ph1-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += pinctrl-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += pinctrl-ph1-ld6b.o
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c
b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c
new file mode 100644
index 0000000..4f950d3
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+void ph1_ld6b_pin_init(void)
+{
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_NAND_DENALI
+ sg_set_pinsel(30, 0, 8, 4); /* XNFRE -> XNFRE */
+ sg_set_pinsel(31, 0, 8, 4); /* XNFWE -> XNFWE */
+ sg_set_pinsel(32, 0, 8, 4); /* NFALE -> NFALE */
+ sg_set_pinsel(33, 0, 8, 4); /* NFCLE -> NFCLE */
+ sg_set_pinsel(34, 0, 8, 4); /* XNFWP -> XNFWP */
+ sg_set_pinsel(35, 0, 8, 4); /* XNFCE0 -> XNFCE0 */
+ sg_set_pinsel(36, 0, 8, 4); /* NRYBY0 -> NRYBY0 */
+ sg_set_pinsel(37, 0, 8, 4); /* XNFCE1 -> NRYBY1 */
+ sg_set_pinsel(38, 0, 8, 4); /* NRYBY1 -> XNFCE1 */
+ sg_set_pinsel(39, 0, 8, 4); /* NFD0 -> NFD0 */
+ sg_set_pinsel(40, 0, 8, 4); /* NFD1 -> NFD1 */
+ sg_set_pinsel(41, 0, 8, 4); /* NFD2 -> NFD2 */
+ sg_set_pinsel(42, 0, 8, 4); /* NFD3 -> NFD3 */
+ sg_set_pinsel(43, 0, 8, 4); /* NFD4 -> NFD4 */
+ sg_set_pinsel(44, 0, 8, 4); /* NFD5 -> NFD5 */
+ sg_set_pinsel(45, 0, 8, 4); /* NFD6 -> NFD6 */
+ sg_set_pinsel(46, 0, 8, 4); /* NFD7 -> NFD7 */
+#endif
+
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ sg_set_pinsel(56, 0, 8, 4); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(57, 0, 8, 4); /* USB0OD -> USB0OD */
+ sg_set_pinsel(58, 0, 8, 4); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(59, 0, 8, 4); /* USB1OD -> USB1OD */
+ sg_set_pinsel(60, 0, 8, 4); /* USB2VBUS -> USB2VBUS */
+ sg_set_pinsel(61, 0, 8, 4); /* USB2OD -> USB2OD */
+ sg_set_pinsel(62, 0, 8, 4); /* USB3VBUS -> USB3VBUS */
+ sg_set_pinsel(63, 0, 8, 4); /* USB3OD -> USB3OD */
+#endif
+}
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c
b/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c
new file mode 100644
index 0000000..96abd02
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+void proxstream2_pin_init(void)
+{
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_NAND_DENALI
+ sg_set_pinsel(30, 8, 8, 4); /* XNFRE -> XNFRE */
+ sg_set_pinsel(31, 8, 8, 4); /* XNFWE -> XNFWE */
+ sg_set_pinsel(32, 8, 8, 4); /* NFALE -> NFALE */
+ sg_set_pinsel(33, 8, 8, 4); /* NFCLE -> NFCLE */
+ sg_set_pinsel(34, 8, 8, 4); /* XNFWP -> XNFWP */
+ sg_set_pinsel(35, 8, 8, 4); /* XNFCE0 -> XNFCE0 */
+ sg_set_pinsel(36, 8, 8, 4); /* NRYBY0 -> NRYBY0 */
+ sg_set_pinsel(37, 8, 8, 4); /* XNFCE1 -> NRYBY1 */
+ sg_set_pinsel(38, 8, 8, 4); /* NRYBY1 -> XNFCE1 */
+ sg_set_pinsel(39, 8, 8, 4); /* NFD0 -> NFD0 */
+ sg_set_pinsel(40, 8, 8, 4); /* NFD1 -> NFD1 */
+ sg_set_pinsel(41, 8, 8, 4); /* NFD2 -> NFD2 */
+ sg_set_pinsel(42, 8, 8, 4); /* NFD3 -> NFD3 */
+ sg_set_pinsel(43, 8, 8, 4); /* NFD4 -> NFD4 */
+ sg_set_pinsel(44, 8, 8, 4); /* NFD5 -> NFD5 */
+ sg_set_pinsel(45, 8, 8, 4); /* NFD6 -> NFD6 */
+ sg_set_pinsel(46, 8, 8, 4); /* NFD7 -> NFD7 */
+#endif
+
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ sg_set_pinsel(56, 8, 8, 4); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(57, 8, 8, 4); /* USB0OD -> USB0OD */
+ sg_set_pinsel(58, 8, 8, 4); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(59, 8, 8, 4); /* USB1OD -> USB1OD */
+ sg_set_pinsel(60, 8, 8, 4); /* USB2VBUS -> USB2VBUS */
+ sg_set_pinsel(61, 8, 8, 4); /* USB2OD -> USB2OD */
+ sg_set_pinsel(62, 8, 8, 4); /* USB3VBUS -> USB3VBUS */
+ sg_set_pinsel(63, 8, 8, 4); /* USB3OD -> USB3OD */
+#endif
+}
diff --git a/arch/arm/mach-uniphier/sbc/Makefile
b/arch/arm/mach-uniphier/sbc/Makefile
index 2c5fd1a..db622d2 100644
--- a/arch/arm/mach-uniphier/sbc/Makefile
+++ b/arch/arm/mach-uniphier/sbc/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += sbc-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += sbc-ph1-pro4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += sbc-ph1-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += sbc-ph1-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += sbc-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += sbc-proxstream2.o
diff --git a/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c
b/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c
new file mode 100644
index 0000000..9c3aeb7
--- /dev/null
+++ b/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sbc-regs.h>
+#include <mach/sg-regs.h>
+
+int proxstream2_sbc_init(const struct uniphier_board_data *bd)
+{
+ /* necessary for ROM boot ?? */
+ /* system bus output enable */
+ writel(0x17, PC0CTRL);
+
+ /*
+ * Only CS1 is connected to support card.
+ * BKSZ[1:0] should be set to "01".
+ */
+ writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
+ writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
+ writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
+ writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
+
+ if (boot_is_swapped()) {
+ /*
+ * Boot Swap On: boot from external NOR/SRAM
+ * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
+ *
+ * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
+ * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
+ */
+ writel(0x0000bc01, SBBASE0);
+ } else {
+ /*
+ * Boot Swap Off: boot from mask ROM
+ * 0x40000000-0x41ffffff: mask ROM
+ * 0x42000000-0x43efffff: memory bank (31MB)
+ * 0x43f00000-0x43ffffff: peripherals (1MB)
+ */
+ writel(0x0000be01, SBBASE0); /* dummy */
+ writel(0x0200be01, SBBASE1);
+ }
+
+ return 0;
+}
diff --git a/configs/ph1_ld6b_defconfig b/configs/ph1_ld6b_defconfig
new file mode 100644
index 0000000..68f6ba8
--- /dev/null
+++ b/configs/ph1_ld6b_defconfig
@@ -0,0 +1,30 @@
+CONFIG_ARM=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PH1_LD6B=y
+CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_TEXT_BASE=0x84000000
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld6b-ref"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_MISC is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
+CONFIG_NAND_DENALI=y
+CONFIG_SYS_NAND_DENALI_64BIT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_SPL_NAND_DENALI=y
+CONFIG_UNIPHIER_SERIAL=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_STORAGE=y
diff --git a/doc/README.uniphier b/doc/README.uniphier
index 6792327..6ba0320 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -48,6 +48,14 @@ PH1-Pro5:
$ make ph1_pro5_defconfig
$ make CROSS_COMPILE=arm-linux-gnueabi-
+ProXstream2:
+ $ make pxs2_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabi-
+
+PH1-LD6b:
+ $ make ph1_ld6b_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabi-
+
You may wish to change the "CROSS_COMPILE=arm-linux-gnueabi-"
to use your favorite compiler.
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
