Hi Olliver, On Fri, Sep 18, 2015 at 11:29 PM, Olliver Schinagl <oliver+l...@schinagl.nl> wrote: > From: Olliver Schinagl <o.schin...@ultimaker.com> > > The designware driver has a build guard which makes it to only work when > using the PHYLIB. With b68fe152272 the PHYLIB was added to the net > Kconfig but not selected by all hardware depending on it. > > This patch enables PHYLIB for the Designware MAC > > Signed-off-by: Olliver Schinagl <o.schin...@ultimaker.com> > --- > drivers/net/Kconfig | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index bbec6a6..51b1668 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -79,10 +79,10 @@ config ETH_SANDBOX_RAW > > config ETH_DESIGNWARE > bool "Synopsys Designware Ethernet MAC" > + select PHYLIB > help > This MAC is present in SoCs from various vendors. It supports > - 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to > - provide the PHY (physical media interface). > + 100Mbit and 1 Gbit operation. > > config PCH_GBE > bool "Intel Platform Controller Hub EG20T GMAC driver" > --
This is not enough. You need update all borads' config.h files to remove CONFIG_PHYLIB, otherwise it causes redefinition warnings. Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
