On 18 September 2015 at 11:42, Hannes Schmelzer <han...@schmelzer.or.at> wrote: > Hi, > > i am currently starting development software for a new B&R board based on > the ZYNQ7000. > > To make live easier i want to try start with the Xilinx Evalboard ZC702, get > there some experience to start afterwards with my own board. > > I have allready built "zynq_zc702_defconfig" - but have no plan how to bring > the build output to my board. > Is it necessary to build some FSBL with the Xilinx SDK an merge the output > with u-boot's output ? > Or is it possible to take some SPL und U-Boot, burn it so SD-Card or QSPI > flash and run ?
Either works fine. For SPL use mmc instead of QSPI - qspi patches on the way to merge mainline. mmc: build the source in mainline and download zynq boot.bin generator from [1] and copy boot.bin and u-boot-dtb.img on to sd card, thats it. [1] https://github.com/openedev/u-boot-zynq/blob/master/tools/zynq-boot-bin.py > > many thanks for help and best regards, > Hannes > thanks! -- Jagan | openedev. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
