On Mon, 2015-09-14 at 08:47 +0200, Stefan Roese wrote: > This patch addresses some comments raised by Scott in the last versions. > Here the changes in detail: > > - Removed __maybe_unused as its not needed > - Added check for strength == 4 and error out for the unsupported > ECC strength values > - Don't set .caclulate, .correct, and .bytes for NAND_ECC_SOFT_BCH as this > will be done in nand_scan_tail() > - Set .caclulate back to fsmc_read_hwecc() in the HW case > - Added comment that this function will only be called on SPEAr platforms, > not supporting the BCH8 HW ECC (FSMC_VER8) > > Signed-off-by: Stefan Roese <s...@denx.de> > Cc: Scott Wood <scottw...@freescale.com> > Cc: Tom Rini <tr...@konsulko.com> > --- > drivers/mtd/nand/fsmc_nand.c | 21 +++++++++++++++------ > 1 file changed, 15 insertions(+), 6 deletions(-)
Acked-by: Scott Wood <scottw...@freescale.com> -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
