This patch extends the misc_init_r() function on sunxi boards
to test for the presence of a suitable "sunxi" SPL header. If
found, and the loader ("fel" utility) provided a non-zero value
for the boot.scr address, then the corresponding environment
variable fel_scriptaddr gets set.
misc_init_r() also sets (or clears) the "fel_booted" variable depending
on the active boot device, using the same logic as spl_boot_device().
The goal is to provide sufficient information (within the U-Boot
environment) to make intelligent decisions on how to continue the boot
process, allowing specific customizations for the "FEL boot" case.
Signed-off-by: Bernhard Nortmann <bernhard.nortm...@web.de>
---
Changes in v2:
- renamed fel_data_addr to fel_script_addr, discarded fel_data_size
- make sure that FEL-related environment vars are always cleared first
- support minimum and maximum SPL (header) version, more verbose error messages
board/sunxi/board.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 9c855f6..aa26e57 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -516,6 +516,52 @@ void get_board_serial(struct tag_serialnr *serialnr)
}
#endif
+#if !defined(CONFIG_SPL_BUILD)
+static int check_signature(unsigned long io_addr, const char *signature,
+ int length)
+{
+ do {
+ if (readb(io_addr) != *signature)
+ return 0;
+ io_addr++;
+ signature++;
+ } while (--length > 0);
+ return 1;
+}
+
+#define SPL_SIGNATURE "SPL" /* marks "sunxi" header */
+#define SPL_MIN_VERSION 1
+#define SPL_MAX_VERSION 1
+
+/*
+ * Check the SPL header for the "sunxi" variant. If found: parse values
+ * that might have been passed by the loader ("fel" utility), and update
+ * the environment accordingly.
+ */
+static void parse_spl_header(void)
+{
+ uint8_t spl_header_version;
+ uint32_t fel_script_addr;
+
+ if (check_signature(0x14, SPL_SIGNATURE, 3)) {
+ spl_header_version = readb(0x17);
+ if (spl_header_version < SPL_MIN_VERSION) {
+ printf("sunxi SPL version mismatch: found 0x%02X <
required minimum 0x%02X\n",
+ spl_header_version, SPL_MIN_VERSION);
+ return;
+ }
+ if (spl_header_version > SPL_MAX_VERSION) {
+ printf("sunxi SPL version mismatch: found 0x%02X >
maximum supported 0x%02X\n",
+ spl_header_version, SPL_MAX_VERSION);
+ return;
+ }
+ fel_script_addr = readl(0x18);
+ if (fel_script_addr)
+ setenv_hex("fel_scriptaddr", fel_script_addr);
+ }
+}
+#endif /* !defined(CONFIG_SPL_BUILD) */
+
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
@@ -524,6 +570,16 @@ int misc_init_r(void)
uint8_t mac_addr[6];
int ret;
+#if !defined(CONFIG_SPL_BUILD)
+ setenv("fel_booted", NULL);
+ setenv("fel_scriptaddr", NULL);
+ /* determine if we are running in FEL mode */
+ if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) { /* eGON.BT0 */
+ setenv("fel_booted", "1");
+ parse_spl_header();
+ }
+#endif
+
ret = sunxi_get_sid(sid);
if (ret == 0 && sid[0] != 0 && sid[3] != 0) {
if (!getenv("ethaddr")) {
--
2.4.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
