Since i.MX7D does not support warm reset, so boot_mode_apply
actually will not work. Also we use outer pmic reset and drop
internal reset signal, so drop boot mode code for 7dsabresd board.
Signed-off-by: Peng Fan <peng....@freescale.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Adrian Alonso <aalo...@freescale.com>
---
board/freescale/mx7dsabresd/mx7dsabresd.c | 14 --------------
include/configs/mx7dsabresd.h | 2 --
2 files changed, 16 deletions(-)
diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c
b/board/freescale/mx7dsabresd/mx7dsabresd.c
index 6d88573..2b14fb6 100644
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -10,7 +10,6 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
-#include <asm/imx-common/boot_mode.h>
#include <asm/io.h>
#include <linux/sizes.h>
#include <common.h>
@@ -458,15 +457,6 @@ int board_init(void)
return 0;
}
-#ifdef CONFIG_CMD_BMODE
-static const struct boot_mode board_boot_modes[] = {
- /* 4 bit bus width */
- {"sd1", MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)},
- {"emmc", MAKE_CFGVAL(0x10, 0x2a, 0x00, 0x00)},
- {NULL, 0},
-};
-#endif
-
#ifdef CONFIG_POWER
#define I2C_PMIC 0
int power_init_board(void)
@@ -501,10 +491,6 @@ int board_late_init(void)
{
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-#ifdef CONFIG_CMD_BMODE
- add_board_boot_modes(board_boot_modes);
-#endif
-
#ifdef CONFIG_ENV_IS_IN_MMC
mmc_late_init();
#endif
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index ec6e0a6..8231c04 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -175,8 +175,6 @@
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
-#define CONFIG_CMD_BMODE
-
/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
--
1.8.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
