For the upcoming nand support we need a bigger heap, esp. ubi[fs] uses
quite a bit of memory, increase the heap size to 64 MB.

Our video code returns unused reserved framebuffer memory to the kernel
before booting it. Drop the #ifdef-ery and simply always reserve 16 MB.

Adjust bootm_size for the above changes.

Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
 include/configs/sunxi-common.h | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 8ada7e2..cf348b3 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -173,8 +173,8 @@
 #define CONFIG_SYS_MMC_ENV_DEV         0       /* first detected MMC 
controller */
 #endif
 
-/* 4MB of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (4 << 20))
+/* 64MB of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (64 << 20))
 
 /*
  * Miscellaneous configurable options
@@ -303,11 +303,7 @@ extern int soft_i2c_gpio_scl;
  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
  * to use as framebuffer. This must be a multiple of 4096.
  */
-#ifdef CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804
-#define CONFIG_SUNXI_MAX_FB_SIZE (12 << 20)
-#else
-#define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20)
-#endif
+#define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 
 /* Do we want to initialize a simple FB? */
 #define CONFIG_VIDEO_DT_SIMPLEFB
@@ -414,12 +410,12 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_PRE_CON_BUF_SZ          4096 /* Aprox 2 80*25 screens */
 
 /*
- * 240M RAM (256M minimum minus space for the framebuffer),
+ * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
  * 1M script, 1M pxe and the ramdisk at the end.
  */
 #define MEM_LAYOUT_ENV_SETTINGS \
-       "bootm_size=0xf000000\0" \
+       "bootm_size=0xa000000\0" \
        "kernel_addr_r=" __stringify(SDRAM_OFFSET(2000000)) "\0" \
        "fdt_addr_r=" __stringify(SDRAM_OFFSET(3000000)) "\0" \
        "scriptaddr=" __stringify(SDRAM_OFFSET(3100000)) "\0" \
-- 
2.4.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to