On 01/09/2015 05:03, Peng Fan wrote: > We have CONFIG_MXC_OCOTP and CONFIG_CMD_FUSE in mx6_common.h, > discard duplicated macro definitions in board header files. > > Signed-off-by: Peng Fan <peng....@freescale.com> > Cc: Stefano Babic <sba...@denx.de> > Cc: Peter Robinson <pbrobin...@gmail.com> > Cc: Otavio Salvador <ota...@ossystems.com.br> > --- > include/configs/cgtqmx6eval.h | 5 ----- > include/configs/mx6ul_14x14_evk.h | 5 ----- > 2 files changed, 10 deletions(-) > > diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h > index 92930c8..0979728 100644 > --- a/include/configs/cgtqmx6eval.h > +++ b/include/configs/cgtqmx6eval.h > @@ -35,11 +35,6 @@ > /* Thermal support */ > #define CONFIG_IMX6_THERMAL > > -#define CONFIG_CMD_FUSE > -#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) > -#define CONFIG_MXC_OCOTP > -#endif > - > /* I2C Configs */ > #define CONFIG_CMD_I2C > #define CONFIG_SYS_I2C > diff --git a/include/configs/mx6ul_14x14_evk.h > b/include/configs/mx6ul_14x14_evk.h > index f643e4d..89e6028 100644 > --- a/include/configs/mx6ul_14x14_evk.h > +++ b/include/configs/mx6ul_14x14_evk.h > @@ -34,11 +34,6 @@ > #define CONFIG_MXC_UART > #define CONFIG_MXC_UART_BASE UART1_BASE > > -#define CONFIG_CMD_FUSE > -#ifdef CONFIG_CMD_FUSE > -#define CONFIG_MXC_OCOTP > -#endif > - > /* MMC Configs */ > #ifdef CONFIG_FSL_USDHC > #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR >
for the 6ul part: Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
