Signed-off-by: Gong Qianyu <qianyu.g...@freescale.com>
---
board/freescale/ls1043ardb/ls1043ardb.c | 8 +++++++
board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg | 7 ++++++
configs/ls1043ardb_sdcard_defconfig | 4 ++++
include/configs/ls1043a_common.h | 30 ++++++++++++++++++++++++
include/configs/ls1043ardb.h | 13 ++++++++--
5 files changed, 60 insertions(+), 2 deletions(-)
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c
b/board/freescale/ls1043ardb/ls1043ardb.c
index 81dd271..991404a 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -12,11 +12,13 @@
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
#include <hwconfig.h>
+#include <mmc.h>
#include <ahci.h>
#include <scsi.h>
#include <fsl_esdhc.h>
#include <fm_eth.h>
#include <fsl_ifc.h>
+#include <spl.h>
#include "cpld.h"
#include "../common/ns_access.h"
@@ -25,12 +27,17 @@ DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
static const char *freq[3] = {"100.00MHZ", "156.25MHZ"};
+#ifndef CONFIG_SD_BOOT
u8 cfg_rcw_src1, cfg_rcw_src2;
u32 cfg_rcw_src;
+#endif
u32 sd1refclk_sel;
printf("Board: LS1043ARDB, boot from ");
+#ifdef CONFIG_SD_BOOT
+ puts("SD\n");
+#else
cfg_rcw_src1 = CPLD_READ(cfg_rcw_src1);
cfg_rcw_src2 = CPLD_READ(cfg_rcw_src2);
cpld_rev_bit(&cfg_rcw_src1);
@@ -43,6 +50,7 @@ int checkboard(void)
puts("NAND\n");
else
printf("Invalid setting of SW4\n");
+#endif
printf("CPLD: V%x.%x\nPCBA: V%x.0\n", CPLD_READ(cpld_ver),
CPLD_READ(cpld_ver_sub), CPLD_READ(pcba_ver));
diff --git a/board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
b/board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
new file mode 100644
index 0000000..28cd958
--- /dev/null
+++ b/board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# RCW
+0810000f 0c000000 00000000 00000000
+14550002 80004012 60040000 61002000
+00000000 00000000 00000000 00038800
+00000000 00001100 00000096 00000001
diff --git a/configs/ls1043ardb_sdcard_defconfig
b/configs/ls1043ardb_sdcard_defconfig
new file mode 100644
index 0000000..5fe0470
--- /dev/null
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SYS_FSL_DDR4"
+CONFIG_ARM=y
+CONFIG_TARGET_LS1043ARDB=y
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index bf1ddc7..1e726fb 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -60,6 +60,36 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/* SD boot SPL */
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500
+
+#define CONFIG_SPL_TEXT_BASE 0x10000000
+#define CONFIG_SPL_MAX_SIZE 0x1d000
+#define CONFIG_SPL_STACK 0x1001e000
+#define CONFIG_SPL_PAD_TO 0x1d000
+
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CONFIG_SYS_MONITOR_LEN 0xa0000
+#endif
+
/* NAND SPL */
#ifdef CONFIG_NAND_BOOT
#define CONFIG_SPL_PBL_PAD
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index e612cee..4565500 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -12,7 +12,7 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-#if defined(CONFIG_NAND_BOOT)
+#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
#define CONFIG_SYS_TEXT_BASE 0x82000000
#else
#define CONFIG_SYS_TEXT_BASE 0x60100000
@@ -45,6 +45,10 @@
#define CONFIG_SYS_FSL_PBL_RCW
board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg
#endif
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
+#endif
+
/*
* NOR Flash Definitions
*/
@@ -217,7 +221,12 @@
*/
#define CONFIG_ENV_OVERWRITE
-#if defined(CONFIG_NAND_BOOT)
+#if defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET (1024 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_NAND_BOOT)
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
