Convert to use DM version of Designware ethernet driver on Intel
quark/galileo.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
Acked-by: Simon Glass <s...@chromium.org>
---
Changes in v5: None
Changes in v3: None
Changes in v2: None
arch/x86/cpu/quark/quark.c | 19 -------------------
configs/galileo_defconfig | 2 +-
2 files changed, 1 insertion(+), 20 deletions(-)
diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c
index 637c370..caa3875 100644
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@@ -6,8 +6,6 @@
#include <common.h>
#include <mmc.h>
-#include <netdev.h>
-#include <phy.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pci.h>
@@ -231,23 +229,6 @@ int cpu_mmc_init(bd_t *bis)
ARRAY_SIZE(mmc_supported));
}
-int cpu_eth_init(bd_t *bis)
-{
- u32 base;
- int ret0, ret1;
-
- qrk_pci_read_config_dword(QUARK_EMAC0, PCI_BASE_ADDRESS_0, &base);
- ret0 = designware_initialize(base, PHY_INTERFACE_MODE_RMII);
-
- qrk_pci_read_config_dword(QUARK_EMAC1, PCI_BASE_ADDRESS_0, &base);
- ret1 = designware_initialize(base, PHY_INTERFACE_MODE_RMII);
-
- if (ret0 < 0 && ret1 < 0)
- return -1;
- else
- return 0;
-}
-
void cpu_irq_init(void)
{
struct quark_rcba *rcba;
diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig
index d05154e..9623986 100644
--- a/configs/galileo_defconfig
+++ b/configs/galileo_defconfig
@@ -12,7 +12,7 @@ CONFIG_BOOTSTAGE_REPORT=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_OF_CONTROL=y
CONFIG_SPI_FLASH=y
-CONFIG_NETDEVICES=y
+CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_PCI=y
CONFIG_DM_RTC=y
--
1.8.2.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
