Hi, I am trying to add fastboot support for mx6qsabresd and I did the following changes on against top of head U-boot:
--- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -238,6 +238,12 @@ #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 #define CONFIG_G_DNL_MANUFACTURER "FSL" + +#define CONFIG_USB_FUNCTION_FASTBOOT +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 #endif #endif /* __MX6QSABRE_COMMON_CONFIG_H */ On the U-boot prompt I run: => fastboot 0 and then in the host PC I try to read the bootloader version: $ fastboot getvar bootloader-version < waiting for device > (and it gets stuck here) After a CTRL+C I have also tried: $ sudo fastboot devices $ ,but nothing is reported. I am able to mount the SD card via 'ums 0 mmc 1' command, so the USB OTG connection is fine. Does anyone have any suggestions? Thanks, Fabio Estevam _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
