Hi Heiko,
> [root@pollux dfu-util]# ./src/dfu-util -l
> dfu-util 0.8
>
> Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
> Copyright 2010-2014 Tormod Volden and Stefan Schmidt
> This program is Free Software and has ABSOLUTELY NO WARRANTY
> Please report bugs to dfu-u...@lists.gnumonks.org
>
> Found DFU: [0908:02d2] ver=0212, devnum=119, cfg=1, intf=0, alt=0,
> name="Linux", serial="UNKNOWN" [root@pollux dfu-util]#
>
> Signed-off-by: Heiko Schocher <h...@denx.de>
> ---
>
> Changes in v5:
> - rebase with current mainline
> commit efde6a579fe: "Prepare v2015.10-rc3"
>
> Changes in v4:
> - rebase after taurus board changes
>
> Changes in v3: None
> Changes in v2:
> - rebase to bd48c0617b5c7212e5bf22169e716da878842da4
> - fix changes introduced through commit:
> 01acd6abbdd5: usb: USB download gadget and functions config options
> coherent naming
> - add comments from Lukasz Majewski <l.majew...@samsung.com>
> - use SZ_X defines
>
> board/siemens/smartweb/smartweb.c | 29 +++++++++++++++++++++
> board/siemens/taurus/taurus.c | 27 ++++++++++++++++++++
> include/configs/smartweb.h | 53
> +++++++++++++++++++++++++++++----------
> include/configs/taurus.h | 30 ++++++++++++++++++++-- 4 files
> changed, 124 insertions(+), 15 deletions(-)
>
> diff --git a/board/siemens/smartweb/smartweb.c
> b/board/siemens/smartweb/smartweb.c index cf8a7f5..2d42488 100644
> --- a/board/siemens/smartweb/smartweb.c
> +++ b/board/siemens/smartweb/smartweb.c
> @@ -25,6 +25,7 @@
> #include <asm/arch/at91_pmc.h>
> #include <asm/arch/at91_spi.h>
> #include <spi.h>
> +#include <asm/arch/clk.h>
> #include <asm/arch/gpio.h>
> #include <watchdog.h>
> #ifdef CONFIG_MACB
> @@ -108,6 +109,29 @@ static void smartweb_macb_hw_init(void)
> }
> #endif /* CONFIG_MACB */
>
> +#ifdef CONFIG_USB_GADGET_AT91
> +#include <linux/usb/at91_udc.h>
> +
> +void at91_udp_hw_init(void)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
> +
> + /* Enable PLLB */
> + writel(get_pllb_init(), &pmc->pllbr);
> + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
> + ;
> +
> + /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */
> + at91_periph_clk_enable(ATMEL_ID_UDP);
> +
> + writel(AT91SAM926x_PMC_UDP, &pmc->scer);
> +}
> +
> +struct at91_udc_data board_udc_data = {
> + .baseaddr = ATMEL_BASE_UDP0,
> +};
> +#endif
> +
> int board_early_init_f(void)
> {
> /* enable this here, as we have SPL without serial support */
> @@ -134,6 +158,11 @@ int board_init(void)
> at91_set_gpio_output(AT91_PIN_PC10, 0);
> at91_set_gpio_output(AT91_PIN_PC11, 1);
>
> +#ifdef CONFIG_USB_GADGET_AT91
> + at91_udp_hw_init();
> + at91_udc_probe(&board_udc_data);
> +#endif
> +
> return 0;
> }
>
> diff --git a/board/siemens/taurus/taurus.c
> b/board/siemens/taurus/taurus.c index edeb15b..72c5e60 100644
> --- a/board/siemens/taurus/taurus.c
> +++ b/board/siemens/taurus/taurus.c
> @@ -285,6 +285,29 @@ void spi_cs_deactivate(struct spi_slave *slave)
> at91_set_gpio_value(TAURUS_SPI_CS_PIN, 1);
> }
>
> +#ifdef CONFIG_USB_GADGET_AT91
> +#include <linux/usb/at91_udc.h>
> +
> +void at91_udp_hw_init(void)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
> +
> + /* Enable PLLB */
> + writel(get_pllb_init(), &pmc->pllbr);
> + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
> + ;
> +
> + /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */
> + at91_periph_clk_enable(ATMEL_ID_UDP);
> +
> + writel(AT91SAM926x_PMC_UDP, &pmc->scer);
> +}
> +
> +struct at91_udc_data board_udc_data = {
> + .baseaddr = ATMEL_BASE_UDP0,
> +};
> +#endif
> +
> int board_init(void)
> {
> /* adress of boot parameters */
> @@ -297,6 +320,10 @@ int board_init(void)
> taurus_macb_hw_init();
> #endif
> at91_spi0_hw_init(TAURUS_SPI_MASK);
> +#ifdef CONFIG_USB_GADGET_AT91
> + at91_udp_hw_init();
> + at91_udc_probe(&board_udc_data);
> +#endif
>
> return 0;
> }
> diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
> index d696d4b..d189c3f 100644
> --- a/include/configs/smartweb.h
> +++ b/include/configs/smartweb.h
> @@ -28,6 +28,7 @@
> * In this case SoC is defined in boards.cfg.
> */
> #include <asm/hardware.h>
> +#include <linux/sizes.h>
>
> /*
> * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the
> initial boot @@ -64,7 +65,7 @@
> */
> #define CONFIG_NR_DRAM_BANKS 1
> #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
> -#define CONFIG_SYS_SDRAM_SIZE (64 << 20)
> +#define CONFIG_SYS_SDRAM_SIZE (64 * SZ_1M)
>
> /*
> * Perform a SDRAM Memtest from the start of SDRAM
> @@ -75,7 +76,7 @@
>
> /* Size of malloc() pool */
> #define CONFIG_SYS_MALLOC_LEN \
> - ROUND(3 * CONFIG_ENV_SIZE + (128 << 10), 0x1000)
> + ROUND(3 * CONFIG_ENV_SIZE + (4 * SZ_1M), 0x1000)
>
> /* NAND flash settings */
> #define CONFIG_NAND_ATMEL
> @@ -140,15 +141,42 @@
>
> #if !defined(CONFIG_SPL_BUILD)
> /* USB configuration */
> +#define CONFIG_CMD_USB
> #define CONFIG_USB_ATMEL
> #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
> #define CONFIG_USB_OHCI_NEW
> -#define CONFIG_USB_STORAGE
> -#define CONFIG_DOS_PARTITION
> #define CONFIG_SYS_USB_OHCI_CPU_INIT
> #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE
> #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
> #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
> +
> +#define CONFIG_USB_HOST_ETHER
> +#define CONFIG_USB_ETHER_ASIX
> +#define CONFIG_USB_ETHER_MCS7830
> +
> +/* USB DFU support */
> +#define CONFIG_CMD_MTDPARTS
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_MTD_PARTITIONS
> +
> +#define CONFIG_USB_GADGET
> +#define CONFIG_USB_GADGET_AT91
> +
> +/* DFU class support */
> +#define CONFIG_CMD_DFU
> +#define CONFIG_USB_FUNCTION_DFU
> +#define CONFIG_DFU_NAND
> +#define CONFIG_USB_GADGET_DOWNLOAD
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M
> +#define DFU_MANIFEST_POLL_TIMEOUT 25000
> +
> +/* USB DFU IDs */
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0908
> +#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
> +#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
> +
> +#define CONFIG_SYS_CACHELINE_SIZE 0x2000
> #endif
>
> /* General Boot Parameter */
> @@ -173,8 +201,8 @@
> #define CONFIG_ENV_IS_IN_NAND
> #define CONFIG_ENV_OFFSET (0x100000)
> #define CONFIG_ENV_OFFSET_REDUND (0x180000)
> -#define CONFIG_ENV_RANGE (0x80000)
> -#define CONFIG_ENV_SIZE (0x20000)
> +#define CONFIG_ENV_RANGE (SZ_512K)
> +#define CONFIG_ENV_SIZE (SZ_128K)
>
> /*
> * Predefined environment variables.
> @@ -193,7 +221,6 @@
> #undef CONFIG_CMD_LOADS
>
> #define CONFIG_CMD_NAND
> -#define CONFIG_CMD_USB
> #define CONFIG_CMD_FAT
>
> #ifdef CONFIG_MACB
> @@ -230,10 +257,10 @@
> /* Defines for SPL */
> #define CONFIG_SPL_FRAMEWORK
> #define CONFIG_SPL_TEXT_BASE 0x0
> -#define CONFIG_SPL_MAX_SIZE (4 * 1024)
> +#define CONFIG_SPL_MAX_SIZE (SZ_4K)
>
> #define CONFIG_SPL_BSS_START_ADDR CONFIG_SYS_SDRAM_BASE
> -#define CONFIG_SPL_BSS_MAX_SIZE (16 * 1024)
> +#define CONFIG_SPL_BSS_MAX_SIZE (SZ_16K)
> #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR +
> \ CONFIG_SPL_BSS_MAX_SIZE)
> #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
> @@ -253,14 +280,14 @@
> #define CONFIG_SPL_NAND_RAW_ONLY
> #define CONFIG_SPL_NAND_SOFTECC
> #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
> -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
> +#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
> #define CONFIG_SYS_NAND_U_BOOT_START
> CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST
> CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_5_ADDR_CYCLE
>
> -#define CONFIG_SYS_NAND_SIZE (256*1024*1024)
> -#define CONFIG_SYS_NAND_PAGE_SIZE 2048
> -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
> +#define CONFIG_SYS_NAND_SIZE (SZ_256M)
> +#define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K
> +#define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K)
> #define CONFIG_SYS_NAND_PAGE_COUNT
> (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE)
> #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
> diff --git a/include/configs/taurus.h b/include/configs/taurus.h
> index c1fed9a..12994c8 100644
> --- a/include/configs/taurus.h
> +++ b/include/configs/taurus.h
> @@ -121,12 +121,38 @@
> /* USB */
> #if defined(CONFIG_BOARD_TAURUS)
> #define CONFIG_USB_ATMEL
> +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
> #define CONFIG_USB_OHCI_NEW
> #define CONFIG_SYS_USB_OHCI_CPU_INIT
> #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
> #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
> #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
> #define CONFIG_USB_STORAGE
> +
> +/* USB DFU support */
> +#define CONFIG_CMD_MTDPARTS
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_MTD_PARTITIONS
> +
> +#define CONFIG_USB_GADGET
> +#define CONFIG_USB_GADGET_AT91
> +
> +/* DFU class support */
> +#define CONFIG_CMD_USB
> +#define CONFIG_CMD_DFU
> +#define CONFIG_USB_FUNCTION_DFU
> +#define CONFIG_DFU_NAND
> +#define CONFIG_USB_GADGET_DOWNLOAD
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M)
> +#define DFU_MANIFEST_POLL_TIMEOUT 25000
> +
> +/* USB DFU IDs */
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0908
> +#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
> +#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
> +
> +#define CONFIG_SYS_CACHELINE_SIZE SZ_8K
> #endif
>
> /* SPI EEPROM */
> @@ -242,7 +268,7 @@
> * Size of malloc() pool
> */
> #define CONFIG_SYS_MALLOC_LEN \
> - ROUND(3 * CONFIG_ENV_SIZE + SZ_128K, 0x1000)
> + ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000)
>
> /* Defines for SPL */
> #define CONFIG_SPL_FRAMEWORK
> @@ -271,7 +297,7 @@
> #define CONFIG_SPL_NAND_RAW_ONLY
> #define CONFIG_SPL_NAND_SOFTECC
> #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
> -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
> +#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
> #define CONFIG_SYS_NAND_U_BOOT_START
> CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST
> CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_5_ADDR_CYCLE
Heiko, I cannot apply this patch clearly on following branch:
u-boot-denx/master
SHA1: efde6a579fe3c172d214fb3047b02c827779738a (v2015.10-rc3)
Could you look into this problem?
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
