Old revisions of Utilite (a miniature PC based on cm-fx6) do not have
a card detect for mmc, and thus the kernel needs to be told that
there's a persistent storage on usdhc3 to force it to probe the mmc
card.

Check the baseboard revision and modify the device tree accordingly
if needed.

Cc: Stefano Babic <sba...@denx.de>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
---
Changes in V2:
        - #define USDHC3_PATH instead of const variable usdhc3_path
        - Do not update device tree on eeprom read failures in a more explicit
          way

 board/compulab/cm_fx6/cm_fx6.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index 572111d..a21e7b0 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -580,9 +580,14 @@ int cm_fx6_setup_ecspi(void) { return 0; }
 #endif
 
 #ifdef CONFIG_OF_BOARD_SETUP
+#define USDHC3_PATH    "/soc/aips-bus@02100000/usdhc@02198000/"
 int ft_board_setup(void *blob, bd_t *bd)
 {
+       u32 baseboard_rev;
+       int nodeoffset;
        uint8_t enetaddr[6];
+       char baseboard_name[16];
+       int err;
 
        /* MAC addr */
        if (eth_getenv_enetaddr("ethaddr", enetaddr)) {
@@ -596,6 +601,21 @@ int ft_board_setup(void *blob, bd_t *bd)
                                     enetaddr, 6, 1);
        }
 
+       baseboard_rev = cl_eeprom_get_board_rev(0);
+       err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0);
+       if (err || baseboard_rev == 0)
+               return 0; /* Assume not an early revision SB-FX6m baseboard */
+
+       if (!strncmp("SB-FX6m", baseboard_name, 7) && baseboard_rev <= 120) {
+               fdt_shrink_to_minimum(blob); /* Make room for new properties */
+               nodeoffset = fdt_path_offset(blob, USDHC3_PATH);
+               fdt_delprop(blob, nodeoffset, "cd-gpios");
+               fdt_find_and_setprop(blob, USDHC3_PATH, "non-removable",
+                                    NULL, 0, 1);
+               fdt_find_and_setprop(blob, USDHC3_PATH, "keep-power-in-suspend",
+                                    NULL, 0, 1);
+       }
+
        return 0;
 }
 #endif
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to