On Wednesday, September 02, 2015 at 08:57:52 PM, Sinan Akman wrote: > On 02/09/15 10:18 AM, Dinh Nguyen wrote: > > On 9/2/15 3:18 AM, Marek Vasut wrote: > >> On Wednesday, September 02, 2015 at 12:41:52 AM, > >> dingu...@opensource.altera.com > >> > >> wrote: > >>> From: Dinh Nguyen <dingu...@opensource.altera.com> > >>> > >>> Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV > >>> based board. The board can boot from SD/MMC. Ethernet is also > >>> supported. > >>> > >>> Signed-off-by: Dinh Nguyen <dingu...@opensource.altera.com> > >>> --- > >>> v2: add ethernet support > >>> > >>> moved board files to board/terasic/de0-nano-soc/ > >>> associate everything with 'de0-nano-soc' or 'de0_nano_soc' > >>> based on u-boot-socfpga/wip/boards branch > >> > >> Applied to wip/boards, thanks. I shuffled the order in arch/arm/mach- > >> socfpga/Kconfig so that things are sorted properly. Can you please > >> double-check that everything builds for you ? > > > > Yes, everything builds for me. Thanks! > > Hi Dinh > > FYI, I just pulled from wip/boards and built with > socfpga_de0_nano_soc_defconfig and booted from SD : > > U-Boot SPL 2015.10-rc2-00311-g859de28-dirty (Sep 02 2015 - 14:47:55) > > drivers/ddr/altera/sequencer.c: Preparing to start memory calibration > > drivers/ddr/altera/sequencer.c: CALIBRATION PASSED > > drivers/ddr/altera/sequencer.c: Calibration complete > > bad magic > > spl: mmc: no boot mode left to try > > ### ERROR ### Please RESET the board ### > > Not sure what I have missed.
Try the following: git revert 811c9a20823a55decc5e15af0684d3d29cdf610f and let me know if this fixes things for you. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
