> -----Original Message----- > From: Marek Vasut [mailto:ma...@denx.de] > Sent: Tuesday, September 01, 2015 5:09 PM > To: Siva Durga Prasad Paladugu > Cc: u-boot@lists.denx.de; Siva Durga Prasad Paladugu > Subject: Re: [PATCH v2 2/2] usb: zynqmp: Enable USB XHCI support > > On Tuesday, September 01, 2015 at 12:31:03 PM, Siva Durga Prasad Paladugu > wrote: > > Enable USB XHCI support for ZynqMP > > > > Signed-off-by: Siva Durga Prasad Paladugu <siva...@xilinx.com> > > --- > > Changes for v2: > > - None > > --- > > include/configs/xilinx_zynqmp.h | 8 ++++++++ > > 1 files changed, 8 insertions(+), 0 deletions(-) > > > > diff --git a/include/configs/xilinx_zynqmp.h > > b/include/configs/xilinx_zynqmp.h index da87188..a9556d5 100644 > > --- a/include/configs/xilinx_zynqmp.h > > +++ b/include/configs/xilinx_zynqmp.h > > @@ -109,6 +109,14 @@ > > #define CONFIG_SYS_LOAD_ADDR 0x8000000 > > > > #if defined(CONFIG_ZYNQMP_USB) > > +#define CONFIG_USB_XHCI_DWC3 > > +#define CONFIG_USB_XHCI > > +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 > > +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 > > +# define CONFIG_CMD_USB > > +# define CONFIG_USB_STORAGE > > Drop this space between # and define please. Ok will do that in V3
Thanks, Siva > > > +#define CONFIG_USB_XHCI_ZYNQMP > > + > > #define CONFIG_USB_DWC3 > > #define CONFIG_USB_DWC3_GADGET > > Best regards, > Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
