Hi,
I got a problem with tftp and found this patch.
-------------
commit 620776d734e4b126c407f636bda825a594a17723
Author: Pavel Machek <pa...@denx.de>
Date: Tue Aug 18 14:34:26 2015 +0200
tftp: adjust settings to be suitable for 100Mbit ethernet
--------------
The default timeout is changed to 100 (ms) and this causes "TFTP error:
'Unsupported option(s) requested' (8)".
Because the option is equal to timeout/1000, now it's zero(100/1000 -> 0) which
is not supported.
Actually I find in an original doc RFC-2349 which specifies this value should
range between "1" and "255" seconds.
So I think there may be a conflict?
Look forward to your help.
This is my test log:
=> tftp a0000000 gqy/bootscript
Using FM1@DTSEC3 device
TFTP from server 10.192.208.233; our IP address is 10.193.20.130
Filename 'gqy/bootscript'.
Load address: 0xa0000000
Loading: *
TFTP error: 'Unsupported option(s) requested' (8)
Starting again
=> setenv tftptimeout 1000
=> tftp a0000000 gqy/bootscript
Using FM1@DTSEC3 device
TFTP from server 10.192.208.233; our IP address is 10.193.20.130
Filename 'gqy/bootscript'.
Load address: 0xa0000000
Loading: #
44.9 KiB/s
done
Bytes transferred = 92 (5c hex)
=>
Regards,
Qianyu
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
