These boards have not been converted to generic board by the deadline.
Remove them.

Signed-off-by: Simon Glass <s...@chromium.org>
---

 arch/arm/mach-at91/Kconfig        |   5 -
 board/esd/meesc/Kconfig           |  12 --
 board/esd/meesc/MAINTAINERS       |   7 -
 board/esd/meesc/Makefile          |  13 --
 board/esd/meesc/meesc.c           | 271 --------------------------------------
 board/esd/meesc/partition.c       |  23 ----
 configs/meesc_dataflash_defconfig |   9 --
 configs/meesc_defconfig           |   9 --
 include/configs/meesc.h           | 199 ----------------------------
 9 files changed, 548 deletions(-)
 delete mode 100644 board/esd/meesc/Kconfig
 delete mode 100644 board/esd/meesc/MAINTAINERS
 delete mode 100644 board/esd/meesc/Makefile
 delete mode 100644 board/esd/meesc/meesc.c
 delete mode 100644 board/esd/meesc/partition.c
 delete mode 100644 configs/meesc_dataflash_defconfig
 delete mode 100644 configs/meesc_defconfig
 delete mode 100644 include/configs/meesc.h

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index de06416..d2d60f3 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -99,10 +99,6 @@ config TARGET_VL_MA2SC
        bool "Support vl_ma2sc"
        select CPU_ARM926EJS
 
-config TARGET_MEESC
-       bool "Support meesc"
-       select CPU_ARM926EJS
-
 config TARGET_OTC570
        bool "Support otc570"
        select CPU_ARM926EJS
@@ -143,7 +139,6 @@ source "board/bluewater/snapper9260/Kconfig"
 source "board/BuS/vl_ma2sc/Kconfig"
 source "board/calao/usb_a9263/Kconfig"
 source "board/egnite/ethernut5/Kconfig"
-source "board/esd/meesc/Kconfig"
 source "board/esd/otc570/Kconfig"
 source "board/mini-box/picosam9g45/Kconfig"
 source "board/ronetix/pm9261/Kconfig"
diff --git a/board/esd/meesc/Kconfig b/board/esd/meesc/Kconfig
deleted file mode 100644
index 150348a..0000000
--- a/board/esd/meesc/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MEESC
-
-config SYS_BOARD
-       default "meesc"
-
-config SYS_VENDOR
-       default "esd"
-
-config SYS_CONFIG_NAME
-       default "meesc"
-
-endif
diff --git a/board/esd/meesc/MAINTAINERS b/board/esd/meesc/MAINTAINERS
deleted file mode 100644
index 9403699..0000000
--- a/board/esd/meesc/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-MEESC BOARD
-M:     Daniel Gorsulowski <daniel.gorsulow...@esd.eu>
-S:     Maintained
-F:     board/esd/meesc/
-F:     include/configs/meesc.h
-F:     configs/meesc_defconfig
-F:     configs/meesc_dataflash_defconfig
diff --git a/board/esd/meesc/Makefile b/board/esd/meesc/Makefile
deleted file mode 100644
index 5d16738..0000000
--- a/board/esd/meesc/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stel...@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
-
-obj-y  += meesc.o
-obj-$(CONFIG_HAS_DATAFLASH) += partition.o
diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c
deleted file mode 100644
index c5994e0..0000000
--- a/board/esd/meesc/meesc.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stel...@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2009-2011
- * Daniel Gorsulowski <daniel.gorsulow...@esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/clk.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static int hw_rev = -1;        /* hardware revision */
-
-int get_hw_rev(void)
-{
-       if (hw_rev >= 0)
-               return hw_rev;
-
-       hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19);
-       hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1;
-       hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2;
-       hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3;
-
-       if (hw_rev == 15)
-               hw_rev = 0;
-
-       return hw_rev;
-}
-
-#ifdef CONFIG_CMD_NAND
-static void meesc_nand_hw_init(void)
-{
-       unsigned long csa;
-       at91_smc_t      *smc    = (at91_smc_t *) ATMEL_BASE_SMC0;
-       at91_matrix_t   *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
-
-       /* Enable CS3 */
-       csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
-       writel(csa, &matrix->csa[0]);
-
-       /* Configure SMC CS3 for NAND/SmartMedia */
-       writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
-               AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(2),
-               &smc->cs[3].setup);
-
-       writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
-               AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
-               &smc->cs[3].pulse);
-
-       writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(6),
-               &smc->cs[3].cycle);
-       writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-               AT91_SMC_MODE_EXNW_DISABLE |
-               AT91_SMC_MODE_DBW_8 |
-               AT91_SMC_MODE_TDF_CYCLE(12),
-               &smc->cs[3].mode);
-
-       /* Configure RDY/BSY */
-       gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
-
-       /* Enable NandFlash */
-       gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif /* CONFIG_CMD_NAND */
-
-#ifdef CONFIG_MACB
-static void meesc_macb_hw_init(void)
-{
-       at91_pmc_t      *pmc    = (at91_pmc_t *) ATMEL_BASE_PMC;
-       /* Enable clock */
-       writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
-       at91_macb_hw_init();
-}
-#endif
-
-/*
- * Static memory controller initialization to enable Beckhoff ET1100 EtherCAT
- * controller debugging
- * The ET1100 is located at physical address 0x70000000
- * Its process memory is located at physical address 0x70001000
- */
-static void meesc_ethercat_hw_init(void)
-{
-       at91_smc_t      *smc1   = (at91_smc_t *) ATMEL_BASE_SMC1;
-
-       /* Configure SMC EBI1_CS0 for EtherCAT */
-       writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
-               AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0),
-               &smc1->cs[0].setup);
-       writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) |
-               AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9),
-               &smc1->cs[0].pulse);
-       writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6),
-               &smc1->cs[0].cycle);
-       /*
-        * Configure behavior at external wait signal, byte-select mode, 16 bit
-        * data bus width, none data float wait states and TDF optimization
-        */
-       writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY |
-               AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) |
-               AT91_SMC_MODE_TDF, &smc1->cs[0].mode);
-
-       /* Configure RDY/BSY */
-       at91_set_b_periph(AT91_PIO_PORTE, 20, 0);       /* EBI1_NWAIT */
-}
-
-int dram_init(void)
-{
-       gd->ram_size = get_ram_size(
-               (void *)CONFIG_SYS_SDRAM_BASE,
-               CONFIG_SYS_SDRAM_SIZE);
-       return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-       int rc = 0;
-#ifdef CONFIG_MACB
-       rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
-#endif
-       return rc;
-}
-
-int checkboard(void)
-{
-       char str[32];
-       u_char hw_type; /* hardware type */
-
-       /* read the "Type" register of the ET1100 controller */
-       hw_type = readb(CONFIG_ET1100_BASE);
-
-       switch (hw_type) {
-       case 0x11:
-       case 0x3F:
-               /* ET1100 present, arch number of MEESC-Board */
-               gd->bd->bi_arch_number = MACH_TYPE_MEESC;
-               puts("Board: CAN-EtherCAT Gateway");
-               break;
-       case 0xFF:
-               /* no ET1100 present, arch number of EtherCAN/2-Board */
-               gd->bd->bi_arch_number = MACH_TYPE_ETHERCAN2;
-               puts("Board: EtherCAN/2 Gateway");
-               /* switch on LED1D */
-               at91_set_pio_output(AT91_PIO_PORTB, 12, 1);
-               break;
-       default:
-               /* assume, no ET1100 present, arch number of EtherCAN/2-Board */
-               gd->bd->bi_arch_number = MACH_TYPE_ETHERCAN2;
-               printf("ERROR! Read invalid hw_type: %02X\n", hw_type);
-               puts("Board: EtherCAN/2 Gateway");
-               break;
-       }
-       if (getenv_f("serial#", str, sizeof(str)) > 0) {
-               puts(", serial# ");
-               puts(str);
-       }
-       printf("\nHardware-revision: 1.%d\n", get_hw_rev());
-       printf("Mach-type: %lu\n", gd->bd->bi_arch_number);
-       return 0;
-}
-
-#ifdef CONFIG_SERIAL_TAG
-void get_board_serial(struct tag_serialnr *serialnr)
-{
-       char *str;
-
-       char *serial = getenv("serial#");
-       if (serial) {
-               str = strchr(serial, '_');
-               if (str && (strlen(str) >= 4)) {
-                       serialnr->high = (*(str + 1) << 8) | *(str + 2);
-                       serialnr->low = simple_strtoul(str + 3, NULL, 16);
-               }
-       } else {
-               serialnr->high = 0;
-               serialnr->low = 0;
-       }
-}
-#endif
-
-#ifdef CONFIG_REVISION_TAG
-u32 get_board_rev(void)
-{
-       return hw_rev | 0x100;
-}
-#endif
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
-       char            *str;
-       char            buf[32];
-       at91_pmc_t      *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
-       /*
-        * Normally the processor clock has a divisor of 2.
-        * In some cases this this needs to be set to 4.
-        * Check the user has set environment mdiv to 4 to change the divisor.
-        */
-       if ((str = getenv("mdiv")) && (strcmp(str, "4") == 0)) {
-               writel((readl(&pmc->mckr) & ~AT91_PMC_MDIV) |
-                       AT91SAM9_PMC_MDIV_4, &pmc->mckr);
-               at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
-               serial_setbrg();
-               /* Notify the user that the clock is not default */
-               printf("Setting master clock to %s MHz\n",
-                       strmhz(buf, get_mck_clk_rate()));
-       }
-
-       return 0;
-}
-#endif /* CONFIG_MISC_INIT_R */
-
-int board_early_init_f(void)
-{
-       at91_pmc_t      *pmc    = (at91_pmc_t *) ATMEL_BASE_PMC;
-
-       /* enable all clocks */
-       writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
-               (1 << ATMEL_ID_PIOCDE) | (1 << ATMEL_ID_UHP),
-               &pmc->pcer);
-
-       at91_seriald_hw_init();
-
-       return 0;
-}
-
-int board_init(void)
-{
-       /* initialize ET1100 Controller */
-       meesc_ethercat_hw_init();
-
-       /* adress of boot parameters */
-       gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_CMD_NAND
-       meesc_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
-       at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_MACB
-       meesc_macb_hw_init();
-#endif
-#ifdef CONFIG_AT91_CAN
-       at91_can_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
-       at91_uhp_hw_init();
-#endif
-       return 0;
-}
diff --git a/board/esd/meesc/partition.c b/board/esd/meesc/partition.c
deleted file mode 100644
index b6afafc..0000000
--- a/board/esd/meesc/partition.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <u...@atmel.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-       {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},       /* Logical adress, CS */
-};
-
-/* define the area offsets */
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-       {0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
-       {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-       {0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
-};
diff --git a/configs/meesc_dataflash_defconfig 
b/configs/meesc_dataflash_defconfig
deleted file mode 100644
index e4f7cce..0000000
--- a/configs/meesc_dataflash_defconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_MEESC=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
diff --git a/configs/meesc_defconfig b/configs/meesc_defconfig
deleted file mode 100644
index 7d1fe7b..0000000
--- a/configs/meesc_defconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_MEESC=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH"
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
deleted file mode 100644
index e5bb873..0000000
--- a/include/configs/meesc.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stel...@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2009-2011
- * Daniel Gorsulowski <daniel.gorsulow...@esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * Configuation settings for the esd MEESC board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * SoC must be defined first, before hardware.h is included.
- * In this case SoC is defined in boards.cfg.
- */
-#include <asm/hardware.h>
-
-/*
- * Warning: changing CONFIG_SYS_TEXT_BASE requires
- * adapting the initial boot program.
- * Since the linker has to swallow that define, we must use a pure
- * hex number here!
- */
-#define CONFIG_SYS_TEXT_BASE           0x20002000
-
-/*
- * since a number of boards are not being listed in linux
- * arch/arm/tools/mach-types any more, the mach-types have to be
- * defined here
- */
-#define MACH_TYPE_MEESC                        2165
-#define MACH_TYPE_ETHERCAN2            2407
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK     32768   /* 32.768 kHz crystal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK     16000000/* 16.0 MHz crystal */
-
-/* Misc CPU related */
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_BOARD_EARLY_INIT_F              /* call board_early_init_f() */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SERIAL_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
-#define CONFIG_MISC_INIT_R                     /* Call misc_init_r */
-
-#define CONFIG_DISPLAY_BOARDINFO               /* call checkboard() */
-#define CONFIG_DISPLAY_CPUINFO                 /* display cpu info and speed */
-#define CONFIG_PREBOOT                         /* enable preboot variable */
-
-/*
- * Hardware drivers
- */
-
-/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */
-#define ATMEL_PMC_UHP                  AT91SAM926x_PMC_UHP
-
-/* general purpose I/O */
-#define CONFIG_AT91_GPIO
-
-/* Console output */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE              ATMEL_BASE_DBGU
-#define CONFIG_USART_ID                        ATMEL_ID_SYS
-#define CONFIG_BAUDRATE                        115200
-
-#define CONFIG_BOOTDELAY               3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
-
-/* LED */
-#define CONFIG_AT91_LED
-
-/*
- * SDRAM: 1 bank, min 32, max 128 MB
- * Initialized before u-boot gets started.
- */
-#define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_SDRAM_BASE          0x20000000 /* ATMEL_BASE_CS1 */
-#define CONFIG_SYS_SDRAM_SIZE          0x02000000
-
-#define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE + 0x00100000)
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + 0x01E00000)
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x00100000)
-
-/*
- * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
- * leaving the correct space for initial global data structure above
- * that address while providing maximum stack area below.
- */
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (ATMEL_BASE_SRAM0 + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-/* DataFlash */
-#ifdef CONFIG_SYS_USE_DATAFLASH
-# define CONFIG_ATMEL_DATAFLASH_SPI
-# define CONFIG_HAS_DATAFLASH
-# define CONFIG_SYS_MAX_DATAFLASH_BANKS                1
-# define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0   0xC0000000      /* CS0 */
-# define AT91_SPI_CLK                          15000000
-# define DATAFLASH_TCSS                                (0x1a << 16)
-# define DATAFLASH_TCHS                                (0x1 << 24)
-#endif
-
-/* NOR flash is not populated, disable it */
-#define CONFIG_SYS_NO_FLASH
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-# define CONFIG_NAND_ATMEL
-# define CONFIG_SYS_MAX_NAND_DEVICE            1
-# define CONFIG_SYS_NAND_BASE                  0x40000000 /* ATMEL_BASE_CS3 */
-# define CONFIG_SYS_NAND_DBW_8
-# define CONFIG_SYS_NAND_MASK_ALE              (1 << 21)
-# define CONFIG_SYS_NAND_MASK_CLE              (1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN            GPIO_PIN_PD(15)
-# define CONFIG_SYS_NAND_READY_PIN             GPIO_PIN_PA(22)
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_FIT
-#define CONFIG_NET_RETRY_COUNT                 20
-#undef CONFIG_RESET_PHY_R
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00a00000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9263"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-
-/* CAN */
-#define CONFIG_AT91_CAN
-
-/* hw-controller addresses */
-#define CONFIG_ET1100_BASE             0x70000000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env in dataflash on CS0 */
-# define CONFIG_ENV_IS_IN_DATAFLASH
-# define CONFIG_SYS_MONITOR_BASE       (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
-                                       0x8400)
-# define CONFIG_ENV_OFFSET             0x4200
-# define CONFIG_ENV_ADDR               (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
-                                       CONFIG_ENV_OFFSET)
-# define CONFIG_ENV_SIZE               0x4200
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-# define CONFIG_ENV_IS_IN_NAND         1
-# define CONFIG_ENV_OFFSET             0xC0000
-# define CONFIG_ENV_SIZE               0x20000
-
-#endif
-
-#define CONFIG_SYS_CBSIZE              512
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN          ROUND(3 * CONFIG_ENV_SIZE + \
-                                       128*1024, 0x1000)
-
-#endif
-- 
2.5.0.457.gab17608

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to