Since commit 2580a2a7e719 ("mtd: nand: Increase max sizes of OOB and
Page size"), three boards (ph1_ld4, ph1_pro4, ph1_sld8) fail to build
with the following error message:
arm-linux-gnueabi-ld.bfd: SPL image plus BSS too big
They compile drivers/mtd/nand/denali_spl.c and it has a page_buffer
as static data:
static uint8_t page_buffer[NAND_MAX_PAGESIZE];
This buffer required 8KB in .bss section before that commit and now
it has been increased to 16KB. Given limited code/memory size for SPL,
it is not a good idea to allocate a page buffer statically. In the
first place, the load address 'dst' can be used as a page buffer.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
drivers/mtd/nand/denali_spl.c | 31 +++++++++++--------------------
1 file changed, 11 insertions(+), 20 deletions(-)
diff --git a/drivers/mtd/nand/denali_spl.c b/drivers/mtd/nand/denali_spl.c
index e98f537..04c59b9 100644
--- a/drivers/mtd/nand/denali_spl.c
+++ b/drivers/mtd/nand/denali_spl.c
@@ -22,7 +22,6 @@ static void __iomem *denali_flash_reg =
(void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
static const int flash_bank;
-static uint8_t page_buffer[NAND_MAX_PAGESIZE];
static int page_size, oob_size, pages_per_block;
static void index_addr(uint32_t address, uint32_t data)
@@ -144,15 +143,15 @@ static int nand_read_page(void *buf, int page)
return 0;
}
-static int nand_block_isbad(int block)
+static int nand_block_isbad(void *buf, int block)
{
int ret;
- ret = nand_read_oob(page_buffer, block * pages_per_block);
+ ret = nand_read_oob(buf, block * pages_per_block);
if (ret < 0)
return ret;
- return page_buffer[CONFIG_SYS_NAND_BAD_BLOCK_POS] != 0xff;
+ return *((uint8_t *)buf + CONFIG_SYS_NAND_BAD_BLOCK_POS) != 0xff;
}
/* nand_init() - initialize data to make nand usable by SPL */
@@ -184,7 +183,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int size,
void *dst)
while (size) {
if (force_bad_block_check || page == 0) {
- ret = nand_block_isbad(block);
+ ret = nand_block_isbad(dst, block);
if (ret < 0)
return ret;
@@ -196,24 +195,16 @@ int nand_spl_load_image(uint32_t offs, unsigned int size,
void *dst)
force_bad_block_check = 0;
- if (unlikely(column || size < page_size)) {
- /* Partial page read */
- ret = nand_read_page(page_buffer,
- block * pages_per_block + page);
- if (ret < 0)
- return ret;
+ ret = nand_read_page(dst, block * pages_per_block + page);
+ if (ret < 0)
+ return ret;
- readlen = min(page_size - column, (int)size);
- memcpy(dst, page_buffer, readlen);
+ readlen = min(page_size - column, (int)size);
+ if (unlikely(column)) {
+ /* Partial page read */
+ memmove(dst, dst + column, readlen);
column = 0;
- } else {
- ret = nand_read_page(dst,
- block * pages_per_block + page);
- if (ret < 0)
- return ret;
-
- readlen = page_size;
}
size -= readlen;
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
