Hi Bin,
On Wed, Aug 26, 2015 at 8:17 AM, Bin Meng <bmeng...@gmail.com> wrote: > Add Kconfig option in preparation for moving board to use Kconfig. > > Signed-off-by: Bin Meng <bmeng...@gmail.com> > > --- > > Changes in v2: > - Add PHYLIB Kconfig option and let PCH_GBE select PHYLIB > > drivers/net/Kconfig | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 7367d9e..5e1687b 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -8,6 +8,12 @@ config DM_ETH > This is currently implemented in net/eth.c > Look in include/net.h for details. > > +config PHYLIB > + bool > + default n > + help > + Enable Ethernet PHY (physical media interface) support. > + > menuconfig NETDEVICES > bool "Network device support" > depends on NET > @@ -79,4 +85,13 @@ config ETH_DESIGNWARE > 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to > provide the PHY (physical media interface). > > +config PCH_GBE > + bool "Intel Platform Controller Hub EG20T GMAC driver" > + depends on DM_ETH && DM_PCI > + select PHYLIB > + default n > + help > + This MAC is present in Intel Platform Controller Hub EG20T. It > + supports 10/100/1000 Mbps operation. > + > endif # NETDEVICES > -- > 1.8.2.1 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
