On 24 August 2015 at 01:00, Bin Meng <bmeng...@gmail.com> wrote: > So far we only enabled one legacy serial port on the SMSC LPC47m > superio chipset on Intel Crown Bay board. As the board also has > dual PS/2 ports routed out, enable the keyboard controller which > is i8042 compatible so that we can use PS/2 keyboard and mouse. > > In order to make PS/2 keyboard work with the VGA console, remove > CONFIG_VGA_AS_SINGLE_DEVICE. To boot Linux kernel with PIC mode > using PIRQ routing table, adjust the mask in the device tree to > reserve irq12 which is used by PS/2 mouse. > > Signed-off-by: Bin Meng <bmeng...@gmail.com> > Reviewed-by: Simon Glass <s...@chromium.org> > > --- > > Changes in v3: None > Changes in v2: None > > arch/x86/dts/crownbay.dts | 2 +- > board/intel/crownbay/crownbay.c | 7 ++++--- > include/configs/crownbay.h | 3 --- > 3 files changed, 5 insertions(+), 7 deletions(-)
Applied to u-boot-x86, thanks! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot