From: Govindraj Raja <govindraj.r...@imgtec.com>
usb stack utilizes the clr/set_bits macros
also usb stack needs phy_to_bus/bus_to_phys functions.
Thus adding these macro and functions for mips platform.
This makes usb stack usable with mips platform.
Also fixes a checkpatch warning with virt_to_phys
forward declaration.
Signed-off-by: Govindraj Raja <govindraj.r...@imgtec.com>
---
arch/mips/include/asm/io.h | 71 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 70 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index a7ab087..8dc521c 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -117,7 +117,7 @@ static inline void set_io_port_base(unsigned long base)
* Change virtual addresses to physical addresses and vv.
* These are trivial on the 1:1 Linux/MIPS mapping
*/
-static inline phys_addr_t virt_to_phys(volatile void * address)
+static inline phys_addr_t virt_to_phys(volatile void *address)
{
#ifndef CONFIG_64BIT
return CPHYSADDR(address);
@@ -504,4 +504,73 @@ static inline void unmap_physmem(void *vaddr, unsigned
long flags)
}
+#define out_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a)
+#define in_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a))
+
+#define out_le32(a, v) out_arch(l, le32, a, v)
+#define out_le16(a, v) out_arch(w, le16, a, v)
+
+#define in_le32(a) in_arch(l, le32, a)
+#define in_le16(a) in_arch(w, le16, a)
+
+#define out_be32(a, v) out_arch(l, be32, a, v)
+#define out_be16(a, v) out_arch(w, be16, a, v)
+
+#define in_be32(a) in_arch(l, be32, a)
+#define in_be16(a) in_arch(w, be16, a)
+
+#define out_8(a, v) __raw_writeb(v, a)
+#define in_8(a) __raw_readb(a)
+
+/*
+ * Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single call. These macros can
+ * also be used to set a multiple-bit bit pattern using a mask, by
+ * specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrbits(type, addr, clear) \
+ out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+ out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+ out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+
+#ifdef CONFIG_PHYS_TO_BUS
+
+extern inline unsigned long phys_to_bus(unsigned long phys)
+{
+ return (unsigned long)virt_to_phys((void *)phys);
+}
+
+extern inline unsigned long bus_to_phys(unsigned long bus)
+{
+ return (unsigned long)phys_to_virt(bus);
+}
+
+#endif
+
+
#endif /* _ASM_IO_H */
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
