Hi, On 13 August 2015 at 01:29, Bin Meng <bmeng...@gmail.com> wrote: > This series adds some improvment to the existing coreboot support, > like >=4GiB memory support, correct E820 table report, don't bother > configure system tables in Kconfig and support booting Linux kernel > with a working graphics console. > > Tested on Intel Bayley Bay, U-Boot loaded by coreboot as a payload. > > > Bin Meng (11): > x86: doc: Update coreboot payload entry point address > x86: coreboot: Increase memrange entry number to 32 > x86: coreboot: Correctly report E820 types > x86: Remove calculate_relocation_address() > x86: coreboot: Allow >=4GiB memory bank size > x86: kconfig: Hide "System tables" for EFI > x86: kconfig: Hide "System tables" for coreboot > x86: Only include cbfs command for coreboot > x86: Enable CONFIG_PCI_CONFIG_HOST_BRIDGE for all boards > video: coreboot: Save VESA mode for future use > x86: Set up video framebuffer for coreboot before loading kernel > > arch/x86/Kconfig | 4 +-- > arch/x86/cpu/coreboot/sdram.c | 33 ++++++++++-------- > arch/x86/include/asm/arch-coreboot/sysinfo.h | 9 ++--- > arch/x86/include/asm/init_helpers.h | 2 -- > arch/x86/lib/init_helpers.c | 51 > +--------------------------- > doc/README.x86 | 6 ++-- > drivers/pci/pci_rom.c | 4 +-- > drivers/video/coreboot_fb.c | 24 +++++++++++++ > include/configs/bayleybay.h | 1 - > include/configs/crownbay.h | 1 - > include/configs/minnowmax.h | 1 - > include/configs/qemu-x86.h | 1 - > include/configs/x86-common.h | 3 ++ > include/vbe.h | 2 ++ > 14 files changed, 56 insertions(+), 86 deletions(-)
I'm going to pick this for this release as it adds fixes for booting as a coreboot payload. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
