Dear Heiko Schocher, In message <4a55c0a2.2010...@denx.de> you wrote: > - CONFIG_SYS_MAX_I2C_BUS changed to 1 > We use only one I2C hardwarecontroller on this boards, so > change the CONFIG_SYS_MAX_I2C_BUS to 1. > - common: dont print errormsg if second IVM Block lacks. > - 82xx, mgcoge: fix double mtdpart entry in environment > - 82xx, mgcoge: activate on second Flash the second bank. > - common: CONFIG_ENV_SIZE 0x4000 for all keymile boards > - common: Change malloc size to 1MByte for all Keymile boards > We need a bigger malloc area for the environment support (128k) > on some Keymile boards (kmeter1) and the upcoming UBI support. > Change it to 1MB for all Keymile boards to be on the save side. > Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for > UBI/UBIFS support. > - Add UBI support to all Keymile boards > - change manner of writing "/localbus/ranges" node > instead of writting the complete "/localbus/ranges" node > before booting Linux, only update the ranges entries > which gets dynamical detected (size of flashes). > This is needed, because keymile adds in the DTS > "/localbus/ranges" node entries, which u-boot must > not overwrite/delete. > - kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips > The Intel P30 chip has 2 non-identical chips on > one die, so we need to define 2 seperate regions > that are scanned by physmap_of independantly. > - kmeter1: Add MTD concat support to Keymile boards > - 82xx, mgcoge: add "unlock=yes" to default environment > - added CONFIG_MTD_DEVICE to get in sync with mainline code > > Signed-off-by: Heiko Schocher <h...@denx.de> > Signed-off-by: Stefan Roese <s...@denx.de> > --- > board/keymile/common/common.c | 35 ++++++++++++++++++-- > board/keymile/common/common.h | 10 ++++++ > board/keymile/km8xx/km8xx.c | 42 ++++++++++++++++-------- > board/keymile/kmeter1/kmeter1.c | 51 +++++++++++++++++++++++++++++ > board/keymile/mgcoge/mgcoge.c | 67 > +++++++++++++++++++++++++++----------- > include/configs/keymile-common.h | 17 +++++++++- > include/configs/km8xx.h | 2 - > include/configs/kmeter1.h | 7 +--- > include/configs/mgcoge.h | 24 +++++++------ > include/i2c.h | 2 + > 10 files changed, 202 insertions(+), 55 deletions(-)
Applied - after fixing a merge confligt in include/configs/kmeter1.h Please check that everything is OK. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Faith may be defined briefly as an illogical belief in the occurence of the improbable. - H. L. Mencken _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
