Now we have a dedicated PCI UART driver, remove previous special
handling for PCI UART in the ns16550 driver.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
drivers/serial/ns16550.c | 31 -------------------------------
1 file changed, 31 deletions(-)
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index c8a77e2..8a5db49 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -363,38 +363,7 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
struct ns16550_platdata *plat = dev->platdata;
fdt_addr_t addr;
- /* try Processor Local Bus device first */
addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
-#ifdef CONFIG_PCI
- if (addr == FDT_ADDR_T_NONE) {
- /* then try pci device */
- struct fdt_pci_addr pci_addr;
- u32 bar;
- int ret;
-
- /* we prefer to use a memory-mapped register */
- ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset,
- FDT_PCI_SPACE_MEM32, "reg",
- &pci_addr);
- if (ret) {
- /* try if there is any i/o-mapped register */
- ret = fdtdec_get_pci_addr(gd->fdt_blob,
- dev->of_offset,
- FDT_PCI_SPACE_IO,
- "reg", &pci_addr);
- if (ret)
- return ret;
- }
-
- ret = fdtdec_get_pci_bar32(gd->fdt_blob, dev->of_offset,
- &pci_addr, &bar);
- if (ret)
- return ret;
-
- addr = bar;
- }
-#endif
-
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
--
1.8.2.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
