Hello Tom,
Am 13.08.2015 um 15:17 schrieb Tom Rini:
On Mon, Jun 29, 2015 at 09:10:48AM +0200, Heiko Schocher wrote:
add support for the at91sam9260 based board smartweb from
siemens. SPL is used without serial support, as this
SoC has only 4k sram for running SPL. Here a U-Boot
bootlog:
RomBOOT
U-Boot 2015.07-rc2-00109-g4ae828c (Jun 15 2015 - 09:31:16 +0200)
CPU: AT91SAM9260
Crystal frequency: 18.432 MHz
CPU clock : 198.656 MHz
Master clock : 99.328 MHz
Watchdog enabled
DRAM: 64 MiB
WARNING: Caches not enabled
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Net: macb0
Hit any key to stop autoboot: 0
U-Boot>
Signed-off-by: Heiko Schocher <h...@denx.de>
Applied to u-boot/master, thanks!
Thanks!
@Andreas: Do you find time for my other at91 board patches pending?
Here my current open patches list (except the at91 dfu support patches)
Patchwork [U-Boot] arm, at91: add axm extensions
https://patchwork.ozlabs.org/patch/484257/
------------------------------------
corvus:
Patchwork [U-Boot] corvus, dfu: add dfu support
https://patchwork.ozlabs.org/patch/484261/
Patchwork [U-Boot] at91: corvus: board updates
https://patchwork.ozlabs.org/patch/484262/
------------------------------------
taurus:
Patchwork [U-Boot] taurus: board updates
https://patchwork.ozlabs.org/patch/484292/
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
