Hi all, I am trying to boot Linux from flash on MIPS Board. When uBoot tries to boot Linux it fails saying "Verifying Checksum Failed.... bad data crc". The bootcmd is fsload 0x80800000 /boot/uImage; bootm 0x80800000.
But When i do a tftp of the same image(uImage) to same address(0x80800000) it works fine. What might be the problem when it is loading uImage from flash? Log is as shown below: Bootrom Version [RTEMS]: Rel_30 Chip: Atlanta A80 Board: REF MTA U-Boot 1.1.2 (Jul 17 2009 - 10:32:57) Board: MIPS CPU Speed 200 MHz DRAM: 32 MB sflash.c:266:DF_F_DataflashProbe: Entered sflash.c:269:DF_F_DataflashProbe: flash type is 0x1 sflash.c:270:DF_F_DataflashProbe: num pages 32768 DataFlash:Nb pages: 32768 Page Size: 256 Size= 8388608 bytes Logical address: 0xAD000000 Nb Erase Blocks: 128 Erase Block Size: 65536 Area 0: AD000000 to AD003FFF Area 1: AD004000 to AD03FFFF Area 2: AD040000 to AD30BFFF Area 3: AD30C000 to AD7FFFFF crc matched In: serial Out: serial Err: serial Net: Eth. Type "run flash_nfs" to mount root filesystem over NFS Hit any key to stop autoboot: 0 ### JFFS2 loading '/boot/uImage' to 0x80800000 Scanning JFFS2 FS: . done. ### JFFS2 load complete: 1853548 bytes loaded to 0x80800000 ## Booting image at 80800000 ... Image Name: Linux Kernel Image with ramdisk. Created: 2009-07-17 11:01:27 UTC Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 1853484 Bytes = 1.8 MB Load Address: 80100000 Entry Point: 80423000 Verifying Checksum ... Bad Data CRC uboot># Please Help Thanks Rahanesh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
