Dear Giulio Benetti,
In message <h1dlfe$3b...@ger.gmane.org> you wrote:
> Based on at91sam9263.
> It is a thermostimulator for hair styling.
> Subsection of
> Software is based on at91sam9263ek one.
>
> Signed-off-by: giulio.bene...@micronovasrl.com
Please use git-format-patch to prepare patches.
Entries for MAINTAINERS and MAKEALL files are missing.
Please use TABs (instead of spaces) for vertical alignment.
> diff -urpN b/board/micronova/c5000/c5000.c a/board/micronova/c5000/c5000.c
> --- b/board/micronova/c5000/c5000.c 1970-01-01 01:00:00.000000000 +0100
> +++ a/board/micronova/c5000/c5000.c 2009-06-18 12:57:52.000000000 +0200
...
> + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
> +
> + gd->fb_base = PHYS_SDRAM + 0x3FB5000; /* mapped into sdram @
> 0x20000000 +
> (64 MByte - (640x480) 8bpp) */
Line too long. Please fix globally.
> +int dram_init(void)
> +{
> + gd->bd->bi_dram[0].start = PHYS_SDRAM;
> + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
> + return 0;
> +}
How about using get_ram_size() for auto-sizing and memory testing?
> diff -urpN b/board/micronova/c5000/config.mk
> a/board/micronova/c5000/config.mk
> --- b/board/micronova/c5000/config.mk 1970-01-01 01:00:00.000000000 +0100
> +++ a/board/micronova/c5000/config.mk 2009-06-18 12:55:19.000000000 +0200
> @@ -0,0 +1 @@
> +TEXT_BASE = 0x23f00000
Copyright entry missing.
> diff -urpN b/Makefile a/Makefile
> --- b/Makefile 2009-06-14 21:30:39.000000000 +0200
> +++ a/Makefile 2009-06-18 12:55:19.000000000 +0200
> @@ -2752,6 +2752,9 @@ at91sam9rlek_config : unconfig
> pm9263_config : unconfig
> @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
>
> +c5000_config : unconfig
> + @$(MKCONFIG) $(@:_config=) arm arm926ejs c5000 micronova at91
> +
Please keep lists sorted.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
######## This message was made from 100% recycled electrons. ########
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
