Add Kconfig options in preparation for moving boards to use Kconfig. Signed-off-by: Simon Glass <s...@chromium.org> ---
Changes in v2: - Move the Kconfig additions to a new patch drivers/net/Kconfig | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ce76a02..fcc3d9b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -20,6 +20,45 @@ menuconfig NETDEVICES if NETDEVICES +config E1000 + bool "Intel PRO/1000 Gigabit Ethernet support" + help + This driver supports Intel(R) PRO/1000 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + +config E1000_SPI_GENERIC + bool "Allow access to the Intel 8257x SPI bus" + depends on E1000 + help + Allow generic access to the SPI bus on the Intel 8257x, for + example with the "sspi" command. + +config E1000_SPI + bool "Enable SPI bus utility code" + depends on E1000 + help + Utility code for direct access to the SPI bus on Intel 8257x. + This does not do anything useful unless you set at least one + of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. + +config E1000_FALLBACK_MAC + bool "Default MAC address for empty EEPROM after production" + depends on E1000 + help + Use this to define a fallback MAC address for when none is available + in the device EEPROM or U-Boot environment variables. + +config CMD_E1000 + bool "Enable the e1000 command" + depends on E1000 + help + This enables the 'e1000' management command for E1000 devices. When + used on devices with SPI support you can reprogram the EEPROM from + U-Boot. + config ETH_SANDBOX depends on DM_ETH && SANDBOX default y -- 2.5.0.rc2.392.g76e840b _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
