Re: [U-Boot] [PATCH 03/03 v3] Add support for Olimex SAM9-L9260 SBC

[Jean-Christophe PLAGNIOL-VILLARD]

On 19:00 Wed 15 Jul     , Dimitar Dimitrov wrote:
> The SAM9-L9260 board support is based on code for AT91SAM9260EK. Networking
> is missing and will be added after the MACB support for AT91 boards is
> fixed to comply with U-Boot guide-lines.
> 
> Signed-off-by: Dimitar Dimitrov <dinu...@gmail.com>
> ---
same as 9261
could you regenerate it with
git format-patch -M -B -C 
>  MAINTAINERS                          |    1 +
>  MAKEALL                              |    1 +
>  Makefile                             |   17 +++
>  board/olimex/sam9_l9260/Makefile     |   56 +++++++++
>  board/olimex/sam9_l9260/config.mk    |    1 +
>  board/olimex/sam9_l9260/led.c        |   41 +++++++
>  board/olimex/sam9_l9260/partition.c  |   40 +++++++
>  board/olimex/sam9_l9260/sam9_l9260.c |  111 ++++++++++++++++++
>  include/configs/sam9_l9260.h         |  214 
> ++++++++++++++++++++++++++++++++++
<snip>
> +
> +#define CONFIG_ARM926EJS     1       /* This is an ARM926EJS Core    */
> +
> +#define AT91_CPU_NAME                "AT91SAM9260"
no-need please remove
> +#define CONFIG_AT91SAM9260   1       /* It's an Atmel AT91SAM9260 SoC*/
> +#define CONFIG_SAM9_L9260    1       /* on an SAM9_L9260 Board       */
> +
> +#define CONFIG_ARCH_CPU_INIT
> +#undef CONFIG_USE_IRQ                        /* we don't need IRQ/FIQ stuff  
> */
> +
> +#define CONFIG_CMDLINE_TAG   1       /* enable passing of ATAGs      */
> +#define CONFIG_SETUP_MEMORY_TAGS 1
> +#define CONFIG_INITRD_TAG    1
> +
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +#define CONFIG_SKIP_RELOCATE_UBOOT
> +
> +/*
> + * Hardware drivers
> + */
> +#define CONFIG_ATMEL_USART   1
> +#undef CONFIG_USART0
> +#undef CONFIG_USART1
> +#undef CONFIG_USART2
> +#define CONFIG_USART3                1       /* USART 3 is DBGU */
> +
> +/* LED */
> +#define CONFIG_AT91_LED
> +#define      CONFIG_RED_LED          AT91_PIN_PA9    /* this is the power 
> led */
> +#define      CONFIG_GREEN_LED        AT91_PIN_PA6    /* this is the user led 
> */
please fix the indent
> +
> +#define CONFIG_BOOTDELAY     3
> +
> +/*
> + * BOOTP options
> + */
> +#define CONFIG_BOOTP_BOOTFILESIZE    1
> +#define CONFIG_BOOTP_BOOTPATH                1
> +#define CONFIG_BOOTP_GATEWAY         1
> +#define CONFIG_BOOTP_HOSTNAME                1
<snip>
> +
> +#define CONFIG_BAUDRATE              115200
> +#define CONFIG_SYS_BAUDRATE_TABLE    {115200 , 19200, 38400, 57600, 9600 }
> +
> +#define CONFIG_SYS_PROMPT            "U-Boot> "
> +#define CONFIG_SYS_CBSIZE            256
> +#define CONFIG_SYS_MAXARGS           16
> +#define CONFIG_SYS_PBSIZE            (CONFIG_SYS_CBSIZE + 
> sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_SYS_LONGHELP          1
> +#define CONFIG_CMDLINE_EDITING       1
> +
> +#define ROUND(A, B)          (((A) + (B)) & ~((B) - 1))
no-need please remove
> +/*
> + * Size of malloc() pool
> + */
Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot