On Wed, Jul 15, 2015 at 04:02:23PM +0200, Paul Kocialkowski wrote: > OMAP devices might boot from peripheral devices, such as UART or USB. > When that happens, the U-Boot SPL tries to boot the next stage (complete > U-Boot) > from that peripheral device, but in most cases, this is not a valid boot > device. > > This introduces a fallback option that reads the SYS_BOOT pins, that are used > by > the bootrom to determine which device to boot from. It is intended for the > SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the > U-Boot SPL can load the next stage from a valid location. > > Practically, this options allows loading the U-Boot SPL through USB and have > it > load the next stage according to the memory device selected by SYS_BOOT > instead > of stalling. > > Signed-off-by: Paul Kocialkowski <cont...@paulk.fr>
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
